Package: acpid Version: 1.0.10-1 Depends: initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Section: System Architecture: armel Maintainer: Paul A. Whittaker Size: 9776 Filename: acpid_1.0.10-1_armel.ipk Source: acpid Description: Event handler for ACPI (power-related) events reported by the BIOS Allows the system to shut down gracefully when the power button is Package: alsamixer Version: 1.0.25-1 Depends: terminfo, libasound2, libc6 (>= 2.15) Section: Utilities Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: 6775a3cc5cbc420b29093f1d5ed10d29 Size: 109624 Filename: alsamixer_1.0.25-1_armel.ipk Source: alsa-utils Description: Curses-based (TTY only) ALSA mixer control utility Used to initially set and to adjust audio volume levels on the various audio channels provided by the audio driver, and to configure any other features provided by the mixer hardware. . Alsamixer is intended for interactive use (unlike amixer). Package: amixer Version: 1.0.25-1 Depends: libasound2, libc6 (>= 2.3) Section: Utilities Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: 2bd7b2e045355ca6f71f323943198c4f Size: 20536 Filename: amixer_1.0.25-1_armel.ipk Source: alsa-utils Description: Command-line-only ALSA mixer control utility Used to initially set and to adjust audio volume levels on the various audio channels provided by the audio driver, and to configure any other features provided by the mixer hardware. . Amixer is mostly intended for use by shell scripts, and is not very user-friendly. Package: anon-ftpd Version: cvs20050309-3 Depends: libwrap0, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Recommends: storage-detect, zip Section: System/Network Architecture: armel Maintainer: Paul A. Whittaker Size: 77842 Filename: anon-ftpd_cvs20050309-3_armel.ipk Source: wu-ftpd Description: Anonymous FTP server An cut-down anonymous-only FTP service based on WU-FTPD, using a Package: apmd Version: 3.2.2-1 Depends: initscript, busybox (>= 1.11.2), libc6 (>= 2.7-1) Section: System Architecture: armel Maintainer: Paul A. Whittaker Size: 19124 Filename: apmd_3.2.2-1_armel.ipk Source: apmd Description: Advanced Power Management (APM) utilities APM has been superceded by ACPI on x86 platforms, but you might need Package: aumix Version: 2.9.1-1 Depends: initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Section: Utilities Architecture: armel Maintainer: Paul A. Whittaker Size: 5920 Filename: aumix_2.9.1-1_armel.ipk Source: aumix Description: Command-line-only OSS audio mixer control utility Used to initially set and to adjust audio volume levels on the Package: autofs4-minimal Version: 4.1.4-2 Depends: libc6 (>= 2.7-1) Provides: autofs Section: System Architecture: armel Maintainer: Paul A. Whittaker Size: 44402 Filename: autofs4-minimal_4.1.4-2_armel.ipk Source: autofs Description: Userspace tool to manage dynamic mount point hierarchies Automount daemon with a minimal subset of modules sufficient to Package: busybox Version: 1.21.0-1 Depends: checkhostname, libc6 (>= 2.7-1) Recommends: console-data, storage-detect Section: Utilities Architecture: armel Maintainer: Paul A. Whittaker Size: 341906 Filename: busybox_1.21.0-1_armel.ipk Source: busybox Description: The Swiss Army Knife of Embedded Linux A collection of miniaturized equivalents of GNU utility programs, all Package: cdda-server Version: 1.1.20-1 Depends: libc6 (>= 2.7-1) Recommends: libdvdcss2 (>= 1.2.9) Section: System/Network Architecture: armel Maintainer: Paul A. Whittaker Size: 6308 Filename: cdda-server_1.1.20-1_armel.ipk Source: xine-lib Description: CD/DVD remote access daemon This server allows a compatible remote application (most likely only Package: cdrtools-minimal Version: 3.00-1 Depends: libc6 (>= 2.7-1) Provides: cdrtools Section: Utilities Architecture: armel Maintainer: Paul A. Whittaker Size: 368020 Filename: cdrtools-minimal_3.00-1_armel.ipk Source: cdrtools Description: Utilities for the creation of ISO9660 CD/DVDs Mkisofs and cdrecord (or compatible utilities) underpin all Linux Package: checkhostname Version: 1.0-1 Depends: libc6 (>= 2.7-1) Section: System Architecture: armel Maintainer: Paul A. Whittaker Size: 3076 Filename: checkhostname_1.0-1_armel.ipk Source: diet-pc Description: Utility to test plausibility of hostnames and IP addresses This is a multipurpose utility primarily intended as a discover Package: cifsd Version: 2.2.12-4 Depends: smb-codepages, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Provides: smb-server Conflicts: smbd Recommends: nmbd, smbpasswd Section: System/Network Architecture: armel Maintainer: Paul A. Whittaker Size: 680938 Filename: cifsd_2.2.12-4_armel.ipk Source: samba Description: A CIFS/SMB file server This version of Samba, although still obsolete, is considerably more Package: cpio Version: 2.11-1 Depends: libc6 (>= 2.7-1) Section: Utilities Architecture: armel Maintainer: Paul A. Whittaker Size: 53668 Filename: cpio_2.11-1_armel.ipk Source: cpio Description: CPIO archive utility CPIO (CoPy In Out) is one of the simplest standard *nix archive Package: dbclient Version: 2014.66-1 Depends: libz1, libc6 (>= 2.4) Provides: ssh-client Section: Utilities/Network Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: f54be1b1fba688439d88896f98b17252 Size: 95706 Filename: dbclient_2014.66-1_armel.ipk Source: dropbear Description: A minimal Secure Shell (SSH) client The Dropbear project's SSH client implementation. . It can do most things that the OpenSSH client can do, at one eighth the size. Package: dosfsck Version: 3.0.25-1 Depends: libc6 (>= 2.7-1) Recommends: fsck Section: System Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: 26962a60eaf26ec602e1270f8d99c28c Size: 24962 Filename: dosfsck_3.0.25-1_armel.ipk Source: dosfstools Description: DOS FAT12/16/32 filesystem consistency checker Includes long filename (VFAT) support. Package: dosfslabel Version: 3.0.25-1 Depends: libc6 (>= 2.4) Section: Utilities Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: 8a5cff9d728790a2c05bab886d84928f Size: 23836 Filename: dosfslabel_3.0.25-1_armel.ipk Source: dosfstools Description: Utility to get or set MSDOS volume labels Package: dropbear-utils Version: 2014.66-1 Depends: libc6 (>= 2.7) Section: Utilities/Network Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: 2cdfb1cc3376845ed89a365424df48f6 Size: 106628 Filename: dropbear-utils_2014.66-1_armel.ipk Source: dropbear Description: Utilities for creation and conversion of dropbear key pairs Package: dropbear Version: 2014.66-1 Depends: libz1, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.4) Provides: ssh-server Section: System/Network Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: edf287b627d03af3b5625b5cac0f30ac Size: 100558 Filename: dropbear_2014.66-1_armel.ipk Source: dropbear Description: A minimal Secure Shell (SSH) server Provides SSH server functionality only (including scp but not sftp target capability) using a fixed set of host keys. . Since the private key is neither unique nor truly private, the server's data encryption provides "strong obfuscation" rather than any form of real security. Package: dtach Version: 0.8-1 Depends: libc6 (>= 2.7-1) Section: Utilities Architecture: armel Maintainer: Paul A. Whittaker Size: 7204 Filename: dtach_0.8-1_armel.ipk Source: dtach Description: Multiplexing TTY screen manager Package: dund Version: 4.96-1 Depends: libbluetooth3, libc6 (>= 2.7-1) Section: System/Network Architecture: armel Maintainer: Paul A. Whittaker Size: 15270 Filename: dund_4.96-1_armel.ipk Source: bluez Description: Bluetooth Dial-Up Networking daemon Package: e2fsck Version: 1.42.4-e2compr-0.4.12-1 Depends: libc6 (>= 2.7-1) Recommends: fsck Section: System Architecture: armel Maintainer: Paul A. Whittaker Size: 235022 Filename: e2fsck_1.42.4-e2compr-0.4.12-1_armel.ipk Source: e2fsprogs Description: Ext2/3/4 filesystem consistency checker Includes support for the highly experimental e2compr ext2 compression Package: e2fsprogs-misc Version: 1.42.4-e2compr-0.4.12-1 Depends: libc6 (>= 2.7-1) Section: Utilities Architecture: armel Maintainer: Paul A. Whittaker Size: 198944 Filename: e2fsprogs-misc_1.42.4-e2compr-0.4.12-1_armel.ipk Source: e2fsprogs Description: Miscellaneous ext2/ext3 filesystem utilities Nonessential tools for manipulating ext2 and ext3 filesystems Package: e3 Version: 2.7.1-1 Section: Utilities Architecture: armel Maintainer: Paul A. Whittaker Size: 12922 Filename: e3_2.7.1-1_armel.ipk Source: e3 Description: Multi-mode TTY text editor A tiny Wordstar-compatible text editor that allows *nix newbies to Package: ed Version: 1.9-1 Depends: libc6 (>= 2.3.4) Section: Utilities Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: 28d816baa59209230b5e663368b56df2 Size: 18914 Filename: ed_1.9-1_armel.ipk Source: ed Description: Primitive line-based text editor No-one in their right minds would seriously consider using ed interactively anymore. But it is extremely useful for performing complex automated in-place text file changes in shell scripts. . There is an ed applet in Busybox, but it doesn't support enough features to be very useful as yet. Package: enable-x11-numlock Version: 2.1.2-1 Depends: libxext6, libx11-6, libc6 (>= 2.7-1) Section: Utilities/X11 Architecture: armel Maintainer: Paul A. Whittaker Size: 5090 Filename: enable-x11-numlock_2.1.2-1_armel.ipk Source: numlock Description: Utility to set, unset or toggle NumLock in an X11 display X11 servers always initialize displays with NumLock off. This Package: esd Version: 0.2.41-1 Depends: libwrap0, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Conflicts: nasd Section: System/Network Architecture: armel Maintainer: Paul A. Whittaker Size: 27576 Filename: esd_0.2.41-1_armel.ipk Source: EsounD Description: Enlightened Sound Daemon - a network audio server EsounD is one of the more widely supported network audio protocols, Package: ethtool Version: 3.13-1 Depends: libc6 (>= 2.7-1) Section: System/Network Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: 7ff0dff140e86aa6fab173225a4c6875 Size: 86052 Filename: ethtool_3.13-1_armel.ipk Source: ethtool Description: A utility to configure Linux 2.6 Ethernet drivers Package: evilwm Version: 0.99.17-3 Depends: libxext6, libx11-6, libc6 (>= 2.7-1) Provides: x-window-manager Section: Applications Architecture: armel Maintainer: Paul A. Whittaker Size: 14120 Filename: evilwm_0.99.17-3_armel.ipk Source: evilwm Description: A tiny, unobtrusive X11 window manager A truly minimalistic window manager, whose only decoration is a Package: fc-cache Version: 2.8.0-1 Depends: libfontconfig1, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Section: System Architecture: armel Maintainer: Paul A. Whittaker Size: 5464 Filename: fc-cache_2.8.0-1_armel.ipk Source: fontconfig Description: Fontconfig cache management utility Does for fonts what ldconfig does for shared libraries. Package: firefox Version: 2.0.20-1 Depends: libstdcpp6, libgtk12-0, libglib12-0, libpng12-0, libfontconfig1, libfreetype6, libxinerama1, libxp6, libxt6, libjpeg62, libxext6, libx11-6, libz1, libc6 (>= 2.7-1) Recommends: ttf-dejavu Section: Applications Architecture: armel Maintainer: Paul A. Whittaker Size: 8450364 Filename: firefox_2.0.20-1_armel.ipk Source: firefox Description: An unofficial build of the Firefox 2 web browser We're actually not allowed to call it Firefox, but naming this Package: floppyd Version: 4.0.18-1 Depends: libxau6, libx11-6, libwrap0, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Section: System/Network Architecture: armel Maintainer: Paul A. Whittaker Size: 8708 Filename: floppyd_4.0.18-1_armel.ipk Source: mtools Description: Block device control agent for mtools Allows mtools programs running on a remote server to access Package: fsck Version: 1.42.4-e2compr-0.4.12-1 Depends: libc6 (>= 2.7-1) Recommends: e2fsck, dosfsck Section: System Architecture: armel Maintainer: Paul A. Whittaker Size: 27102 Filename: fsck_1.42.4-e2compr-0.4.12-1_armel.ipk Source: e2fsprogs Description: Generic filesystem integrity checker A filesystem agnostic front-end for back-end filesystem specific Package: fw-setenv Version: 0.1-1 Depends: libc6 (>= 2.7-1) Section: Utilities Architecture: armel Maintainer: Paul A. Whittaker Size: 7928 Filename: fw-setenv_0.1-1_armel.ipk Source: fw_setenv Description: Utility for manipulating U-Boot environment variables This utility allows reading and writing of flash memory U-Boot Package: gdisk Version: 0.8.6-1 Depends: libuuid1, libstdcpp6, libc6 (>= 2.7-1) Section: Utilities Architecture: armel Maintainer: Paul A. Whittaker Size: 81724 Filename: gdisk_0.8.6-1_armel.ipk Source: gptfdisk Description: EFI GUID (GPT) partition table viewer/editor An fdisk lookalike for use with GUID partition tables. Package: getnetmask Version: 1.0-2 Depends: libc6 (>= 2.7-1) Section: System Architecture: armel Maintainer: Paul A. Whittaker Size: 2926 Filename: getnetmask_1.0-2_armel.ipk Source: diet-pc Description: Utility to determine and IP address' subnet using /etc/netmasks glibc doesn't support the /etc/netmasks file, so this helper utility Package: gpm Version: 1.20.7-1 Depends: initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Section: System Architecture: armel Maintainer: Paul A. Whittaker Size: 44260 Filename: gpm_1.20.7-1_armel.ipk Source: gpm Description: General Purpose Mouse daemon Permits use of a mouse (e.g. for cut and paste operations) in TTY Package: hiawatha Version: 7.8.2-1 Depends: initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Provides: web-server Recommends: php5-cgi Section: System/Network Architecture: armel Maintainer: Paul A. Whittaker Size: 75926 Filename: hiawatha_7.8.2-1_armel.ipk Source: hiawatha Description: Hiawatha web server Hiawatha is a lightweight web server with an emphasis on security Package: hidd Version: 4.96-1 Depends: libbluetooth3, libc6 (>= 2.7-1) Section: System/Network Architecture: armel Maintainer: Paul A. Whittaker Size: 18430 Filename: hidd_4.96-1_armel.ipk Source: bluez Description: Bluetooth Human Interface Device daemon Package: icaclient-wfcmgr-en Version: 11.100-1 Depends: icaclient-wfica-en (11.100), libxm3, libxmu6, libxpm4, libsm6, libice6, libxt6, libx11-6, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Section: Applications Architecture: armel Maintainer: Paul A. Whittaker Size: 469938 Filename: icaclient-wfcmgr-en_11.100-1_armel.ipk Source: ICAClient Description: Session Manager for ICA Client (English) A GUI ICA session manager. Package: icaclient-wfica-en Version: 11.100-1 Depends: libcap2, xdpyinfo, libxaw7, iconv-data (>= 2.7-1), libxinerama1, libxrender1, libjpeg62, libxt6, libxext6, libx11-6, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Provides: ica-client Recommends: storage-detect Section: Applications Architecture: armel Maintainer: Paul A. Whittaker Size: 1338528 Filename: icaclient-wfica-en_11.100-1_armel.ipk Source: ICAClient Description: Citrix Independent Computing Architecture (ICA) client (English) For connection to a Windows server O/S running Citrix Winframe/ Package: iconv-data-minimal Version: 2.16-1 Depends: libc6 (2.16) Provides: iconv-data Section: Libraries Architecture: armel Maintainer: Paul A. Whittaker Size: 9018 Filename: iconv-data-minimal_2.16-1_armel.ipk Source: eglibc Description: Minimal set of glibc international character set encodings This package contains the minimum number of iconv (gconv) files Package: idmapd Version: 1.2.9-1 Depends: libnfsidmap0, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7) Section: System/Network Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: ea8e8a8bf6af2c3eb9192ba409a5391c Size: 46348 Filename: idmapd_1.2.9-1_armel.ipk Source: nfs-utils Description: NFS version 4 Identity Mapping Daemon This daemon must run on both NFS4 client and NFS4 server, with the same domain name (in /etc/idmapd.conf) in each case. Package: ietd Version: 1.4.20.2-1 Depends: initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Section: System/Network Architecture: armel Maintainer: Paul A. Whittaker Size: 40770 Filename: ietd_1.4.20.2-1_armel.ipk Source: iscsitarget Description: iSCSI Enterprise Target Daemon The userspace component of an iSCSI target implementation, which Package: ipkg Version: 0.99.163-4 Depends: libc6 (>= 2.7-1) Section: Utilities Architecture: armel Maintainer: Paul A. Whittaker Size: 56602 Filename: ipkg_0.99.163-4_armel.ipk Source: ipkg Description: A package manager for embedded Linux Required for runtime installation and removal of software components. Package: iptables Version: 1.4.21-1 Depends: initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Section: Utilities Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: d6d4e70148fae0912ce25c325213a79e Size: 120600 Filename: iptables_1.4.21-1_armel.ipk Source: iptables Description: Control utility for kernel IPv4 and IPv6 filter/NAT capability This utility is required to load policies into the Linux layer 3 IP firewall (Linux 2.4 and later - 2.2 uses a simpler and incompatible capability called ipchains), and to display loaded policies. . The rules input and output by iptables are low-level and pretty unintelligible to the lay person, and are thus typically machine- generated by a more user friendly front end. Package: irqbalance Version: 0.56-1 Depends: initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Section: System Architecture: armel Maintainer: Paul A. Whittaker Size: 28974 Filename: irqbalance_0.56-1_armel.ipk Source: irqbalance Description: IRQ Balance Daemon (for SMP servers) You may need this if you have a SMP host with a heavy I/O interrupt Package: iscsid Version: 2.0-871-1 Depends: initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Section: System/Network Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: af3aed040b3182c9e11a38b109d2542f Size: 161564 Filename: iscsid_2.0-871-1_armel.ipk Source: open-iscsi Description: iSCSI initiator The userspace component of an iSCSI initiator implementation, which will present volumes served by a remote iSCSI server as if they were local SCSI disks. . Requires the iscsi_tcp kernel driver. Package: kernel-image-hot-e Version: 2.6.18.8 Depends: sysvinit Provides: kernel-image Section: System/Kernel Architecture: armel Maintainer: Paul A. Whittaker Size: 1721452 Filename: kernel-image-hot-e_2.6.18.8_armel.ipk Source: linux Description: The ThinLinx Hot-e 2.6.18.8 kernel Package: kernel-image-qemu-versatile Version: 2.6.35.12-1 Provides: kernel-image Section: System/Kernel Architecture: armel Maintainer: Paul A. Whittaker Size: 1805142 Filename: kernel-image-qemu-versatile_2.6.35.12-1_armel.ipk Source: linux Description: A 2.6.35.12 Linux kernel for QEMU's Versatile PB/AB emulator Package: kernel-image-thecus-nx100 Version: 2.6.32.54-1 Provides: kernel-image Section: System/Kernel Architecture: armel Maintainer: Paul A. Whittaker Size: 2333662 Filename: kernel-image-thecus-nx100_2.6.32.54-1_armel.ipk Source: linux Description: A 2.6.32 kernel for Thecus N2100/N4100/N4100+ NASes Package: kernel-image-tlx150 Version: 2.6.27.37-tlx150 Depends: sysvinit Provides: kernel-image Section: System/Kernel Architecture: armel Maintainer: Paul A. Whittaker Size: 1482148 Filename: kernel-image-tlx150_2.6.27.37-tlx150_armel.ipk Source: linux Description: The ThinLinx TLX150 2.6.27.37 kernel Package: kernel-image-tlx400l Version: 2.6.38.6-1 Depends: sysvinit Provides: kernel-image Section: System/Kernel Architecture: armel Maintainer: Paul A. Whittaker Size: 1454044 Filename: kernel-image-tlx400l_2.6.38.6-1_armel.ipk Source: linux Description: The ThinLinx TLX400-L 2.6.27.57 kernel Package: kernel-modules-hot-e Version: 2.6.18.8 Depends: busybox (>= 1.17.1-1) Provides: kernel-modules Section: System/Kernel Architecture: armel Maintainer: Paul A. Whittaker Size: 972394 Filename: kernel-modules-hot-e_2.6.18.8_armel.ipk Source: linux Description: Loadable modules for the ThinLinx Hot-e 2.6.18.8 kernel Kernel drivers that have been externalized - to keep the size of the Package: kernel-modules-qemu-versatile Version: 2.6.35.12-1 Depends: busybox (>= 1.17.1-1) Provides: kernel-modules Section: System/Kernel Architecture: armel Maintainer: Paul A. Whittaker Size: 978686 Filename: kernel-modules-qemu-versatile_2.6.35.12-1_armel.ipk Source: linux Description: Loadable modules for the 2.6.35.12 QEMU (Versatile PB/AB) kernel Package: kernel-modules-thecus-nx100 Version: 2.6.32.54-1 Depends: busybox (>= 1.17.1-1) Provides: kernel-modules Section: System/Kernel Architecture: armel Maintainer: Paul A. Whittaker Size: 1654168 Filename: kernel-modules-thecus-nx100_2.6.32.54-1_armel.ipk Source: linux Description: Loadable modules for the Thecus N2100/N4100/N4100+ 2.6.32.54 kernel Package: kernel-modules-tlx150 Version: 2.6.27.37-tlx150 Depends: amixer, initscript, busybox (>= 1.17.1-1) Provides: kernel-modules Section: System/Kernel Architecture: armel Maintainer: Paul A. Whittaker Size: 1058080 Filename: kernel-modules-tlx150_2.6.27.37-tlx150_armel.ipk Source: linux Description: Loadable modules for the ThinLinx TLX150 2.6.27.37 kernel Package: kernel-modules-tlx400l Version: 2.6.38.6-1 Depends: amixer, initscript, busybox (>= 1.17.1-1) Provides: kernel-modules Section: System/Kernel Architecture: armel Maintainer: Paul A. Whittaker Size: 1288694 Filename: kernel-modules-tlx400l_2.6.38.6-1_armel.ipk Source: linux Description: Loadable modules for the ThinLinx TLX400-L 2.6.38.6 kernel Package: ldconfig Version: 2.16-1 Depends: libc6 (2.16) Section: Utilities Architecture: armel Maintainer: Paul A. Whittaker Size: 272422 Filename: ldconfig_2.16-1_armel.ipk Source: eglibc Description: Configuration utility for the runtime dynamic linker This is needed to (re)generate the /etc/ld.so.cache file, which the Package: libaio1 Version: 0.3.109-1 Section: Libraries Architecture: armel Maintainer: Paul A. Whittaker Size: 1860 Filename: libaio1_0.3.109-1_armel.ipk Source: libaio Description: Linux kernel asynchronous I/O library Package: libasound2 Version: 1.0.27.2-1 Depends: libc6 (>= 2.7-1) Section: Libraries Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: 36156ef2f31ad7d64a4c13e717af8ed1 Size: 345292 Filename: libasound2_1.0.27.2-1_armel.ipk Source: alsa-lib Description: Userspace API for interfacing with kernel ALSA (audio) drivers Applications need this library in order to make use of Advanced Linux Sound Architecture (ALSA) features. . Although ALSA has replaced OSS, ALSA drivers can provide backward compatible OSS emulation for applications that are not ALSA-ware. In embedded contexts, OSS is usually preferred even when an ALSA option is available, because the OSS API doesn't require this large library. Package: libatk10-0 Version: 2.8.0-1 Depends: libglib20-0 (>= 2.31.2), libc6 (>= 2.4) Section: Libraries Architecture: armel Maintainer: Paul A. Whittaker Size: 38714 Filename: libatk10-0_2.8.0-1_armel.ipk Source: atk Description: Accessibility Tool Kit library A component of GTK 2.0. Package: libattr1 Version: 2.4.46-1 Depends: libc6 (>= 2.7-1) Section: Libraries Architecture: armel Maintainer: Paul A. Whittaker Size: 6526 Filename: libattr1_2.4.46-1_armel.ipk Source: attr Description: Filesystem extended attribute API Package: libbluetooth3 Version: 4.96-1 Section: Libraries/Network Architecture: armel Maintainer: Paul A. Whittaker Size: 37040 Filename: libbluetooth3_4.96-1_armel.ipk Source: bluez Description: Linux Bluetooth kernel API Package: libc6-minimal-stdabi Version: 2.7-18 Provides: libc6-stdabi Section: Libraries Architecture: armel Maintainer: Paul A. Whittaker Size: 1033338 Filename: libc6-minimal-stdabi_2.7-18_armel.ipk Source: glibc Description: A minimal set of Standard ABI GNU C libraries These are Standard ABI libraries, not EABI. You need them in order Package: libc6-minimal Version: 2.16-1 Provides: libc6 Section: Libraries Architecture: armel Maintainer: Paul A. Whittaker Size: 1142400 Filename: libc6-minimal_2.16-1_armel.ipk Source: eglibc Description: A minimal set of GNU C libraries needed to run almost everything Package: libcairo2 Version: 1.12.16-1 Depends: libpng12-0, libfontconfig1, libfreetype6, libxrender1, libpixman-1-0, libxext6, libx11-6, libz1, libc6 (>= 2.11) Section: Libraries/X11 Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: 7de16eea0fecb35cba1ea7bfb678db07 Size: 372574 Filename: libcairo2_1.12.16-1_armel.ipk Source: cairo Description: 2D vector graphics library Package: libcap2 Version: 2.21-1 Depends: libattr1, libc6 (>= 2.7-1) Section: Libraries Architecture: armel Maintainer: Paul A. Whittaker Size: 6858 Filename: libcap2_2.21-1_armel.ipk Source: libcap Description: POSIX.1e capabilities API Package: libcelt051-0 Version: 0.5.1.3-1 Depends: libc6 (>= 2.7-1) Section: Libraries Architecture: armel Maintainer: Paul A. Whittaker Size: 34370 Filename: libcelt051-0_0.5.1.3-1_armel.ipk Source: celt Description: The CELT audio codec runtime library Package: libdevmapper102 Version: 2.02.98-1 Depends: libc6 (>= 2.3) Section: Libraries Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: 2023d23b2ab76e731881313e0c70e93d Size: 94096 Filename: libdevmapper102_2.02.98-1_armel.ipk Source: lvm2 Description: Linux Kernel Device Mapper API Package: libdrm-intel1 Version: 2.4.56-1 Depends: libpciaccess0, libdrm2, libc6 (>= 2.2) Section: Libraries Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: cf7b8daf19dcac9c971b2ac777bb67bc Size: 56586 Filename: libdrm-intel1_2.4.56-1_armel.ipk Source: libdrm Description: Direct rendering API for Intel chipsets Package: libdrm-nouveau1 Version: 2.4.25-1 Depends: libdrm2, libc6 (>= 2.7-1) Section: Libraries Architecture: armel Maintainer: Paul A. Whittaker Size: 10260 Filename: libdrm-nouveau1_2.4.25-1_armel.ipk Source: libdrm Description: Userspace API for kernel DRM for nVidia chipsets Package: libdrm-nouveau2 Version: 2.4.56-1 Depends: libdrm2, libc6 (>= 2.1.3) Section: Libraries Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: 14fbc32525c5709c6e0c0ce5bd53d6bc Size: 12928 Filename: libdrm-nouveau2_2.4.56-1_armel.ipk Source: libdrm Description: Direct rendering API for nVidia chipsets Package: libdrm-radeon1 Version: 2.4.56-1 Depends: libdrm2, libc6 (>= 2.1.3) Section: Libraries Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: 50263942e7166aeef58d52f72f65932c Size: 21270 Filename: libdrm-radeon1_2.4.56-1_armel.ipk Source: libdrm Description: Direct rendering API for ATI/AMD (Radeon) chipsets Package: libdrm2 Version: 2.4.56-1 Depends: libc6 (>= 2.7) Section: Libraries Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: f1ccf6fff56d9638c6c17b436676b193 Size: 18726 Filename: libdrm2_2.4.56-1_armel.ipk Source: libdrm Description: Userspace API for kernel Direct Rendering Manager (DRM) drivers Package: libdvdcss2 Version: 1.2.13-1 Depends: libc6 (>= 2.7-1) Section: Libraries Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: 119c893dd9f415c67ebc617f0a9aa315 Size: 17974 Filename: libdvdcss2_1.2.13-1_armel.ipk Source: libdvdcss Description: DVD decryption library Provides CSS decryption routines for reading region-locked (RPC2) DVDs. This software may be deemed illegal in your locality. . This build includes a patch from the Xine project that adds the ability to access a remote physical device via the network. Package: libexpat1 Version: 2.1.0-1 Depends: libc6 (>= 2.7-1) Section: Libraries Architecture: armel Maintainer: Paul A. Whittaker Size: 47548 Filename: libexpat1_2.1.0-1_armel.ipk Source: expat Description: XML parser library Package: libffi5 Version: 3.0.10-1 Depends: libc6 (>= 2.4) Section: Libraries Architecture: armel Maintainer: Paul A. Whittaker Size: 13680 Filename: libffi5_3.0.10-1_armel.ipk Source: libffi Description: Foreign Function Interface library Package: libfontconfig1 Version: 2.8.0-1 Depends: libfreetype6, libexpat1, libc6 (>= 2.7-1) Recommends: fc-cache Section: Libraries Architecture: armel Maintainer: Paul A. Whittaker Size: 92544 Filename: libfontconfig1_2.8.0-1_armel.ipk Source: fontconfig Description: Generic font configuration library Fontconfig is a back-end API for managing client-side fonts (usually Package: libfreetype6 Version: 2.4.6-1 Depends: libz1, libc6 (>= 2.7-1) Section: Libraries Architecture: armel Maintainer: Paul A. Whittaker Size: 231158 Filename: libfreetype6_2.4.6-1_armel.ipk Source: freetype2 Description: TrueType font engine Anything that uses TrueType fonts will need this library. Package: libgdk-pixbuf20-0 Version: 2.26.4-1 Depends: libglib20-0 (>= 2.31.2), libpng12-0, libjpeg62, libx11-6, libc6 (>= 2.4) Section: Libraries/X11 Architecture: armel Maintainer: Paul A. Whittaker Size: 154814 Filename: libgdk-pixbuf20-0_2.26.4-1_armel.ipk Source: libgdk-pixbuf Description: GTK2's image file support library This build lacks TIFF support. Package: libglib12-0 Version: 1.2.10-1 Depends: libc6 (>= 2.7-1) Section: Libraries Architecture: armel Maintainer: Paul A. Whittaker Size: 69086 Filename: libglib12-0_1.2.10-1_armel.ipk Source: glib Description: Generic data structure library Historically GLib was intertwined with GTK, and this is still its Package: libglib20-0 Version: 2.37.0-1 Depends: libffi5, libc6 (>= 2.9) Section: Libraries Architecture: armel Maintainer: Paul A. Whittaker Size: 837150 Filename: libglib20-0_2.37.0-1_armel.ipk Source: glib2 Description: Generic data structure library Package: libgtk12-0 Version: 1.2.10-1 Depends: libxi6, libxext6, libx11-6, libc6 (>= 2.7-1) Section: Libraries/X11 Architecture: armel Maintainer: Paul A. Whittaker Size: 633372 Filename: libgtk12-0_1.2.10-1_armel.ipk Source: gtk Description: GIMP Tool Kit X11 widget set GTK was developed long ago as a user interface toolkit for The GIMP, Package: libgtk20-0 Version: 2.24.17-1 Depends: libgdk-pixbuf20-0, libatk10-0, libpango10-0, libxcomposite1, libxdamage1, libcairo2, libglib20-0 (>= 2.28.0), libxcursor1, libxfixes3, libxi6, libfontconfig1, libfreetype6, libxinerama1, libxrandr2, libxrender1, libxext6, libx11-6, libc6 (>= 2.4) Suggests: libgtk20-i18n Section: Libraries/X11 Architecture: armel Maintainer: Paul A. Whittaker Size: 1842882 Filename: libgtk20-0_2.24.17-1_armel.ipk Source: gtk+ Description: Graphical Tool Kit version 2 This widget set is used by many complex graphical applications, and is the basis of the GNOME look and feel. . Unfortunately its footprint, plus those of its exclusive dependencies, is very much larger than the older (and uglier) GTK version 1. Package: libice6 Version: 1.0.8-2 Depends: libc6 (>= 2.7-1) Section: Libraries/X11 Architecture: armel Maintainer: Paul A. Whittaker Size: 35426 Filename: libice6_1.0.8-2_armel.ipk Source: libICE Description: X11 Inter-Client Exchange library Package: libjpeg62 Version: 6b-2 Depends: libc6 (>= 2.7-1) Section: Libraries Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: f915d8ba5656ac6292acbb9729e3953c Size: 57710 Filename: libjpeg62_6b-2_armel.ipk Source: jpegsrc Description: The ubiqitous JPEG graphics library Provides routines for manipulation and rendering of JPEG images. Package: libnfsidmap0 Version: 0.25-1 Depends: libc6 (>= 2.7-1) Section: Libraries Architecture: armel Maintainer: Paul A. Whittaker Size: 14198 Filename: libnfsidmap0_0.25-1_armel.ipk Source: libnfsidmap Description: NFS4 identity mapper back-end library Package: libpango10-0 Version: 1.30.1-1 Depends: libcairo2, libglib20-0 (>= 2.31.2), libxft2, libfontconfig1, libfreetype6, libxrender1, libx11-6, libc6 (>= 2.4) Section: Libraries/X11 Architecture: armel Maintainer: Paul A. Whittaker Size: 248206 Filename: libpango10-0_1.30.1-1_armel.ipk Source: pango Description: Internationalized text rendering and layout library A component of GTK 2.0. . This build lacks libthai support. Package: libpciaccess0 Version: 0.13.1-1 Depends: libz1, libc6 (>= 2.7-1) Section: Libraries Architecture: armel Maintainer: Paul A. Whittaker Size: 13020 Filename: libpciaccess0_0.13.1-1_armel.ipk Source: libpciaccess Description: Generic PCI bus access API Package: libpixman-1-0 Version: 0.32.4-1 Depends: libc6 (>= 2.7-1) Section: Libraries/X11 Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: abe950ff8d8c4a13e525ef1646f622d0 Size: 156530 Filename: libpixman-1-0_0.32.4-1_armel.ipk Source: pixman Description: X11/Cairo pixel manipulation library Package: libpng12-0 Version: 1.2.35-1 Depends: libz1, libc6 (>= 2.7-1) Section: Libraries Architecture: armel Maintainer: Paul A. Whittaker Size: 61264 Filename: libpng12-0_1.2.35-1_armel.ipk Source: libpng Description: The Portable Network Graphics library Provides routines for manipulation and rendering of PNG images. Package: libsdl12-0 Version: 1.2.14-1 Depends: libc6 (>= 2.7-1) Recommends: libgl1, libxrandr2, libxrender1, libxinerama1, libasound2, libxext6, libx11-6 Section: Libraries Architecture: armel Maintainer: Paul A. Whittaker Size: 141446 Filename: libsdl12-0_1.2.14-1_armel.ipk Source: SDL Description: Simple DirectMedia Layer library An abstraction layer that provides standardized access to underlying Package: libsensors4 Version: 3.3.5-1 Depends: libc6 (>= 2.7-1) Section: Libraries Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: cedf0925c6e13a9aadde4e2f8c13f173 Size: 38120 Filename: libsensors4_3.3.5-1_armel.ipk Source: lm_sensors Description: Hardware sensor library /etc/sensors.conf will most likely need to be modified to suit your mainboard, a process for which there may be little or no documentation. Unfortunately sensor interpretation is something of a black art; even BIOSes often report incorrect values. Package: libsm6 Version: 1.2.1-2 Depends: libice6, libc6 (>= 2.7-1) Section: Libraries/X11 Architecture: armel Maintainer: Paul A. Whittaker Size: 12530 Filename: libsm6_1.2.1-2_armel.ipk Source: libSM Description: The X11 Session Management library Package: libsqlite3-0 Version: 3.7.9-1 Depends: libc6 (>= 2.7-1) Section: Libraries Architecture: armel Maintainer: Paul A. Whittaker Size: 293494 Filename: libsqlite3-0_3.7.9-1_armel.ipk Source: sqlite Description: API for a lightweight serverless SQL database Package: libssl1-0-0 Version: 1.0.0o-1 Depends: libc6 (>= 2.7) Section: Libraries Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: bbad49bd4e98d0c5214cf59b68a8fc53 Size: 732400 Filename: libssl1-0-0_1.0.0o-1_armel.ipk Source: openssl Description: Open Secure Sockets Layer (SSL) library Package: libstdcpp6 Version: 4.3.2-1 Depends: libc6 (>= 2.7-1) Section: Libraries Architecture: armel Maintainer: Paul A. Whittaker Size: 269624 Filename: libstdcpp6_4.3.2-1_armel.ipk Source: gcc Description: C++ runtime library This binary was ripped off from Debian Lenny, because it seems Package: libsvn-1-0 Version: 1.6.17-1 Depends: libsqlite3-0, libuuid1, libz1, libc6 (>= 2.7-1) Section: Libraries Architecture: armel Maintainer: Paul A. Whittaker Size: 492684 Filename: libsvn-1-0_1.6.17-1_armel.ipk Source: subversion Description: Libraries for the Subversion version control system Statically linked against libapr 1.4.5 and libaprutil 1.3.12 to save Package: libtirpc1 Version: 0.2.2-1 Depends: libc6 (>= 2.7-1) Section: Libraries Architecture: armel Maintainer: Paul A. Whittaker Size: 55988 Filename: libtirpc1_0.2.2-1_armel.ipk Source: libtirpc1 Description: Transport Independent Remote Procedure Call library Package: libtransmission1 Version: 1.76-1 Depends: libz1, libc6 (>= 2.7-1) Section: Libraries/Network Architecture: armel Maintainer: Paul A. Whittaker Size: 660450 Filename: libtransmission1_1.76-1_armel.ipk Source: transmission Description: Transmission (BitTorrent client) core library This library implements the core functionality of the Transmission Package: libudev0 Version: 175-1 Depends: libc6 (>= 2.7-1) Section: Libraries Architecture: armel Maintainer: Paul A. Whittaker Size: 22852 Filename: libudev0_175-1_armel.ipk Source: udev Description: Userspace device framework library Although DIET-PC doesn't use udev (it uses Busybox's mdev instead), some applications (notably libvirt[d]) use the udev API. Package: libuuid1 Version: 1.42.4-e2compr-0.4.12-1 Depends: libc6 (>= 2.7-1) Section: Libraries Architecture: armel Maintainer: Paul A. Whittaker Size: 8600 Filename: libuuid1_1.42.4-e2compr-0.4.12-1_armel.ipk Source: e2fsprogs Description: Universally Unique ID (UUID) library Package: libwrap0 Version: 7.6-ipv6.4-3 Depends: libc6 (>= 2.7-1) Section: Libraries/Network Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: 24400aa2bba8f5feb29c5f0663a7b950 Size: 11724 Filename: libwrap0_7.6-ipv6.4-3_armel.ipk Source: tcp_wrappers Description: Provides basic IP filtering and logging for network daemons Package: libx11-6 Version: 1.1.6-1 Depends: libxdmcp6, libxau6, libc6 (>= 2.7-1) Section: Libraries/X11 Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: 915154918282239c616ce86d2b6b314f Size: 541054 Filename: libx11-6_1.1.6-1_armel.ipk Source: libX11 (Xorg) Description: Essential infrastructure for all X11 applications You need this package in order to run any kind of X11 application (including an X11 server). However, if you're planning on displaying the application locally, you'll need an X11 server also. . The package consists of Xlib (libX11) and related data files, including bare minimum internationalisation data. Package: libxau6 Version: 1.0.8-1 Depends: libc6 (>= 2.4) Section: Libraries/X11 Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: bc0f23e09769e738a9c2c2461105b69b Size: 4188 Filename: libxau6_1.0.8-1_armel.ipk Source: libXau Description: X11 Authorization library Package: libxaw6 Version: 1.1-1 Depends: libxmu6, libxt6, libx11-6, libc6 (>= 2.7-1) Section: Libraries/X11 Architecture: armel Maintainer: Paul A. Whittaker Size: 123758 Filename: libxaw6_1.1-1_armel.ipk Source: Xaw95 Description: A non-ugly Athena-compatible widget set The Athena widget set is smaller than any other widget set, but Package: libxaw7-fake Version: 3.0-1 Depends: libxaw6, libc6 (>= 2.7-1) Provides: libxaw7 Section: Libraries/X11 Architecture: armel Maintainer: Paul A. Whittaker Size: 2012 Filename: libxaw7-fake_3.0-1_armel.ipk Source: diet-pc Description: A placebo to satisfy applications with libXaw.so.7 dependencies libXaw.so.7 is exactly the same thing as libXaw.so.6 except that it Package: libxcb1 Version: 1.8.1-1 Depends: libxdmcp6, libxau6, libc6 (>= 2.7-1) Section: Libraries/X11 Architecture: armel Maintainer: Paul A. Whittaker Size: 152942 Filename: libxcb1_1.8.1-1_armel.ipk Source: xcb Description: X11 C Bindings XCB is intended as an eventual replacement for Xlib. Transitionally, libX11 still exists and uses libxcb as a back end. Package: libxcomposite1 Version: 0.4.4-1 Depends: libx11-6, libc6 (>= 2.4) Section: Libraries/X11 Architecture: armel Maintainer: Paul A. Whittaker Size: 3752 Filename: libxcomposite1_0.4.4-1_armel.ipk Source: libXdamage Description: X11 Composite extension library Package: libxcursor1 Version: 1.1.14-1 Depends: libxfixes3, libxrender1, libx11-6, libc6 (>= 2.4) Section: Libraries/X11 Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: 0d5a5daf78cac7b16b31f04c344ebd16 Size: 15504 Filename: libxcursor1_1.1.14-1_armel.ipk Source: libXcursor Description: X11 cursor management library Package: libxdamage1 Version: 1.1.4-1 Depends: libxfixes3, libx11-6, libc6 (>= 2.4) Section: Libraries/X11 Architecture: armel Maintainer: Paul A. Whittaker Size: 3960 Filename: libxdamage1_1.1.4-1_armel.ipk Source: libXdamage Description: X11 damaged region extension library Package: libxdmcp6 Version: 1.1.1-1 Depends: libc6 (>= 2.7-1) Section: Libraries/X11 Architecture: armel Maintainer: Paul A. Whittaker Size: 7324 Filename: libxdmcp6_1.1.1-1_armel.ipk Source: libXdmcp Description: X11 Display Manager Control Protocol (XDMCP) library Package: libxext6 Version: 1.0.4-1 Depends: libx11-6, libc6 (>= 2.7-1) Section: Libraries/X11 Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: d5a675d3eeb872060637c1473012a3fe Size: 20160 Filename: libxext6_1.0.4-1_armel.ipk Source: libXext (Xorg) Description: X11 Extension library Package: libxfixes3 Version: 5.0.1-1 Depends: libx11-6, libc6 (>= 2.4) Section: Libraries/X11 Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: 33d228055129298b511a59fbaa87fd3d Size: 6370 Filename: libxfixes3_5.0.1-1_armel.ipk Source: libXfixes Description: X11 XFIXES extension API Package: libxft2 Version: 2.3.2-1 Depends: libfontconfig1, libxrender1, libfreetype6, libz1, libc6 (>= 2.4) Section: Libraries/X11 Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: 6106b0a0ac79a0f2d3f2d21c95dbbaa9 Size: 31176 Filename: libxft2_2.3.2-1_armel.ipk Source: libXft Description: TrueType font rendering library for X11 applications A high-level API allowing X11 clients to select and draw local TrueType fonts, using Fontconfig and Xrender back-ends. Package: libxi6 Version: 1.6.2-1 Depends: libxext6, libx11-6 (>= 1.4), libc6 (>= 2.4) Section: Libraries/X11 Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: dc26067df3a5c507370830e7baddffc2 Size: 21272 Filename: libxi6_1.6.2-1_armel.ipk Source: libXi Description: XInput library API for the XInput X server extension, which deals with oddball input devices (things other than ordinary mouse and keyboard). Package: libxine1-minimal Version: 1.1.20-1 Depends: libz1, libc6 (>= 2.7-1) Provides: libxine1 Suggests: libasound2, libxvmc1 Recommends: libxinerama1, libxv1, libxext6, libx11-6 Section: Libraries Architecture: armel Maintainer: Paul A. Whittaker Size: 3063066 Filename: libxine1-minimal_1.1.20-1_armel.ipk Source: xine-lib Description: Xine media player engine The Xine media player back-end components that do all the actual Package: libxinerama1 Version: 1.1.3-1 Depends: libxext6, libx11-6, libc6 (>= 2.4) Section: Libraries/X11 Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: 13fa2bd489f71d7a410dd044d975f24a Size: 3378 Filename: libxinerama1_1.1.3-1_armel.ipk Source: libXinerama Description: Xinerama library API for the Xinerama X server extension, which seamlessly expands a single X11 display to encompass multiple physical screens. Package: libxm2 Version: 0.95.0-1 Depends: libxp6, libxt6, libx11-6, libc6 (>= 2.7-1) Section: Libraries/X11 Architecture: armel Maintainer: Paul A. Whittaker Size: 592574 Filename: libxm2_0.95.0-1_armel.ipk Source: lesstif Description: Motif 1.2 widget set The Motif-compatible LessTif widget set, which is less functional Package: libxm3 Version: 2.2.4-1 Depends: libxp6, libxmu6, libxt6, libx11-6, libc6 (>= 2.7-1) Section: Libraries/X11 Architecture: armel Maintainer: Paul A. Whittaker Size: 944162 Filename: libxm3_2.2.4-1_armel.ipk Source: OpenMotif Description: Motif 2.0 widget set Motif is one of the more elegant widget sets, but is so large that Package: libxm4 Version: 2.3.3-1 Depends: libxp6, libxmu6, libxt6, libx11-6, libc6 (>= 2.7-1) Section: Libraries/X11 Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: b9f6e8ebee39876412f191321accc2de Size: 932716 Filename: libxm4_2.3.3-1_armel.ipk Source: OpenMotif Description: Motif 2.0 widget set Motif is one of the more elegant widget sets, but is so large that you wouldn't use it voluntarily for embedded applications. But unfortunately, Citrix decided to adopt OpenMotif 2.3 widgets for recent releases (11+) of their ICA Client. Package: libxml2 Version: 2.8.0-1 Depends: libz1, libc6 (>= 2.7-1) Section: Libraries Architecture: armel Maintainer: Paul A. Whittaker Size: 478104 Filename: libxml2_2.8.0-1_armel.ipk Source: libxml2 Description: The GNOME XML library Package: libxmu6 Version: 1.1.2-1 Depends: libxt6, libxext6, libx11-6, libc6 (>= 2.7) Section: Libraries/X11 Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: 112e1e7beae7a0fba76f47d549efdc1c Size: 40088 Filename: libxmu6_1.1.2-1_armel.ipk Source: libXmu Description: X11 Miscellaneous Utility library Package: libxmuu1 Version: 1.1.2-1 Depends: libx11-6, libc6 (>= 2.4) Section: Libraries/X11 Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: 3019b632b51d80cacba8c73bbfa93566 Size: 5504 Filename: libxmuu1_1.1.2-1_armel.ipk Source: libXmu Description: X11 Miscellaneous Utility library (micro) A cut-down version of the Xmu library, without Xt and Xext dependencies. Package: libxp6 Version: 1.0.2-1 Depends: libxext6, libx11-6, libc6 (>= 2.4) Section: Libraries/X11 Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: aaec930494f4a579f2178f396439d585 Size: 11098 Filename: libxp6_1.0.2-1_armel.ipk Source: libXp Description: X11 Print Extension library APIs allowing X applications to use an Xprint server for printer rendering. Package: libxpm4 Version: 3.5.11-1 Depends: libx11-6, libc6 (>= 2.7) Section: Libraries/X11 Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: 5d09a29455c3464907649db9b8df573a Size: 26464 Filename: libxpm4_3.5.11-1_armel.ipk Source: libXpm Description: X11 pixmap library Routines for the manipulation and rendering of X11 pixmap (XPM) objects. Package: libxrandr2 Version: 1.3.2-1 Depends: libxrender1, libxext6, libx11-6, libc6 (>= 2.7-1) Section: Libraries/X11 Architecture: armel Maintainer: Paul A. Whittaker Size: 11386 Filename: libxrandr2_1.3.2-1_armel.ipk Source: libXrandr Description: X11 RandR extension API Package: libxrender1 Version: 0.9.8-1 Depends: libx11-6, libc6 (>= 2.1.3) Section: Libraries/X11 Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: 424385d25be4874397810e91510e064b Size: 14694 Filename: libxrender1_0.9.8-1_armel.ipk Source: libXrender Description: X11 render extension API Package: libxt6 Version: 1.1.4-1 Depends: libsm6, libx11-6, libc6 (>= 2.7) Section: Libraries/X11 Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: 8328c3fee434a642583d3d24cf64b9cf Size: 136032 Filename: libxt6_1.1.4-1_armel.ipk Source: libXt Description: The X Toolkit library libXt is frequently used by X11 applications, along with a widget set library. Package: libxv1 Version: 1.0.9-1 Depends: libxext6, libx11-6, libc6 (>= 2.4) Section: Libraries/X11 Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: b9e0486daebef866dc9008fa5acb0d00 Size: 6416 Filename: libxv1_1.0.9-1_armel.ipk Source: libXv Description: XVideo library API for the XVideo X server extension, which provides access to GPU hardware acceleration features for video rendering. Package: libxvmc1 Version: 1.0.8-1 Depends: libxext6, libx11-6, libc6 (>= 2.4) Section: Libraries/X11 Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: 5a2375a0a1e06a89451aaee7f1d348a9 Size: 10386 Filename: libxvmc1_1.0.8-1_armel.ipk Source: libXvMC Description: XVideo Motion Compensation libraries APIs for the XVideo-MotionCompensation X server extension, which provides access to hardware MPEG (video) decoding features. . The libXvMCW library provides a high-level interface, and the libXvMC library provides a mid-level interface. They are useless without an appropriate hardware-specific XvMC library, which implements the underlying low-level functions. Package: libxxf86vm1 Version: 1.0.2-1 Depends: libxext6, libx11-6, libc6 (>= 2.7-1) Section: Libraries/X11 Architecture: armel Maintainer: Paul A. Whittaker Size: 9194 Filename: libxxf86vm1_1.0.2-1_armel.ipk Source: libXxf86vm (Xorg) Description: XFree86 video mode extension library API for the X11 XFree86-VidModeExtension extension. Package: libz1 Version: 1.2.8-1 Depends: libc6 (>= 2.7-1) Section: Libraries Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: 6256c19751facdf7a4779e271bfbd912 Size: 42772 Filename: libz1_1.2.8-1_armel.ipk Source: zlib Description: A compression algorithm library Needed by most programs that use compression. Package: lp-server Version: 1.1.6-1 Depends: libwrap0, initscript, busybox (>= 1.11.2), libc6 (>= 2.7-1) Section: System/Network Architecture: armel Maintainer: Paul A. Whittaker Size: 10008 Filename: lp-server_1.1.6-1_armel.ipk Source: lp_server Description: Provides network access to serial or parallel ports The primary purpose of lp_server (borrowed from LTSP) is to make a Package: lpd Version: 2008.05.17-1 Depends: libwrap0, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Recommends: textps Section: System Architecture: armel Maintainer: Paul A. Whittaker Size: 71928 Filename: lpd_2008.05.17-1_armel.ipk Source: lpr Description: No frills LPD print service Traditional BSD printing utilities, supporting Berkeley LPD only (no Package: lspci Version: 3.3.0-1 Depends: pciids, libz1, libc6 (>= 2.7) Section: Utilities Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: 9fcf5cb02990206affc6f2e39461e87b Size: 39846 Filename: lspci_3.3.0-1_armel.ipk Source: pciutils Description: Lists detected PCI devices in a human-readable fashion Package: lvm2 Version: 2.02.98-1 Depends: libdevmapper102, libc6 (>= 2.3.3) Section: Utilities Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: ac383e3aee1aa4d025fdbd40eddbbd9e Size: 355426 Filename: lvm2_2.02.98-1_armel.ipk Source: lvm2 Description: The Linux Logical Volume Manager Simply put, LVM2 aggregates blocks of storage from one or more block devices and presents them as new block devices. Although LVM2 has basic RAID capabilities, its primary purpose is storage abstraction rather than storage redundancy. . This build lacks LVM1 backward compatibility and all features related to clustering. Package: madplay Version: 0.15.2b-1 Depends: libz1, libc6 (>= 2.7-1) Section: Utilities Architecture: armel Maintainer: Paul A. Whittaker Size: 109900 Filename: madplay_0.15.2b-1_armel.ipk Source: madplay Description: Command line integer-only MPEG audio player This MPEG 1/2/3 audio player doesn't use any floating point Package: make Version: 4.0-1 Depends: libc6 (>= 2.7-1) Section: Utilities Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: 9e2417a6b2bfbe8ab079dace3c8a105a Size: 75292 Filename: make_4.0-1_armel.ipk Source: make Description: Source code project compilation utility Package: mcookie Version: 2.12r-1 Depends: libc6 (>= 2.7-1) Section: System/X11 Architecture: armel Maintainer: Paul A. Whittaker Size: 4772 Filename: mcookie_2.12r-1_armel.ipk Source: util-linux Description: Utility to generate MIT-MAGIC-COOKIE-1 X11 authentication tokens Package: mdadm Version: 2.6.9-3 Depends: sendmail, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Section: Utilities Architecture: armel Maintainer: Paul A. Whittaker Size: 84418 Filename: mdadm_2.6.9-3_armel.ipk Source: mdadm Description: Utility for managing RAID devices You need this utility in order to inspect or administer the internal Package: microdc2 Version: 0.15.6-1 Depends: dtach, libxml2, libz1, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Provides: dc-client Recommends: dc-server, storage-detect (>= 3.0-1) Section: Utilities/Network Architecture: armel Maintainer: Paul A. Whittaker Size: 218128 Filename: microdc2_0.15.6-1_armel.ipk Source: microdc2 Description: A command-line Direct Connect (P2P) client Microdc is a defunct product, but remains the smallest DC client Package: microdc Version: 0.11.0-3 Depends: dtach, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.11) Provides: dc-client Recommends: dc-server, storage-detect (>= 3.0-1) Section: Utilities/Network Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: 7c70a3357367a278fc6bebdc16bfd5ca Size: 167522 Filename: microdc_0.11.0-3_armel.ipk Source: microdc Description: A command-line Direct Connect (P2P) client Microdc is a defunct product, but remains the smallest DC client available for Linux, as all successor products (whether command-line or GUI) rely upon large libraries. Hence it is well suited to use as an automated back end in an embedded context. . The intended purpose of this package is to work with storage-detect and opendchub to share all detected mass storage volumes using the DC P2P protocol at boot time. . DC is not particularly useful as a WAN P2P protocol (BitTorrent has achieved supremacy in this arena), but excels as a LAN P2P protocol on high speed networks, as it's easier to use than FTP and very much quicker than CIFS and NFS. . Note that microdc only supports original DC, not ADC (Advanced Direct Connect). It therefore does not implement TTH hashes, which may mean that some DC++-based clients will refuse to talk to it. There is a successor project (microdc2) that does support TTH hashing, but its use of libxml2 results in a binary approximately four times larger. DCTC requires glib-2.0, which is even worse. Package: mkdosfs Version: 3.0.25-1 Depends: libc6 (>= 2.7-1) Recommends: mkfs Section: Utilities Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: 70ca3947b05f38a33a0635616c2ab647 Size: 15322 Filename: mkdosfs_3.0.25-1_armel.ipk Source: dosfstools Description: DOS FAT12/16/32 filesystem creation utility Includes long filename (VFAT) support. Package: mke2fs Version: 1.42.4-e2compr-0.4.12-1 Depends: libc6 (>= 2.7-1) Recommends: mkfs Section: Utilities Architecture: armel Maintainer: Paul A. Whittaker Size: 128080 Filename: mke2fs_1.42.4-e2compr-0.4.12-1_armel.ipk Source: e2fsprogs Description: Ext2/3/4 filesystem creation utility Includes support for the highly experimental e2compr ext2 compression Package: mkfs Version: 2.12r-1 Depends: libc6 (>= 2.7-1) Recommends: mke2fs, mkdosfs Section: Utilities Architecture: armel Maintainer: Paul A. Whittaker Size: 3116 Filename: mkfs_2.12r-1_armel.ipk Source: util-linux Description: Generic filesystem creation utility A filesystem agnostic front-end for specific back-end filesystem Package: module-init-tools Version: 3.9-2 Depends: libz1, libc6 (>= 2.7-1) Recommends: kernel-modules Section: Utilities Architecture: armel Maintainer: Paul A. Whittaker Size: 51504 Filename: module-init-tools_3.9-2_armel.ipk Source: module-init-tools Description: Utilities for managing Linux >= 2.5.48 kernel modules This package is deprecated. Initscript 3.5 and later use Busybox Package: mount Version: 2.12r-3 Depends: busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Section: Utilities Architecture: armel Maintainer: Paul A. Whittaker Size: 30708 Filename: mount_2.12r-3_armel.ipk Source: util-linux Description: Full-featured mount utility The standard mount utility, which is better than the Busybox mount Package: mt-daapd Version: 0.2.4.2-1 Depends: libz1, initscript, busybox (>= 1.11.2), libc6 (>= 2.7-1) Section: System/Network Architecture: armel Maintainer: Paul A. Whittaker Size: 161120 Filename: mt-daapd_0.2.4.2-1_armel.ipk Source: mt-daapd (a.k.a. Firefly Media Server) Description: An iTunes-compatible media server Package: mtd-utils-minimal Version: git300508-1 Depends: libc6 (>= 2.7-1) Provides: mtd-utils Section: Utilities Architecture: armel Maintainer: Paul A. Whittaker Size: 33138 Filename: mtd-utils-minimal_git300508-1_armel.ipk Source: mtd-utils Description: Utilities for manipulation of Memory Technology Devices (MTDs) A minimal set of utilities for essential raw NOR and NAND flash Package: nasd Version: 1.9.4-1 Depends: initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Recommends: aumix Section: System/Network Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: 14292118465349788e3b5fc457d54fd6 Size: 49756 Filename: nasd_1.9.4-1_armel.ipk Source: NAS Description: Network Audio Server Provides remote NAS-aware client applications with access to a local audio device. Package: nbd-client Version: 2.9.13-1 Depends: libc6 (>= 2.7-1) Section: System/Network Architecture: armel Maintainer: Paul A. Whittaker Size: 7220 Filename: nbd-client_2.9.13-1_armel.ipk Source: nbd Description: Network Block Device client Presents block devices on remote servers as if they were local. Package: nbd-server Version: 1.4-2 Depends: libwrap0, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Section: System/Network Architecture: armel Maintainer: Paul A. Whittaker Size: 8308 Filename: nbd-server_1.4-2_armel.ipk Source: nbd Description: Network Block Device server Serves a local block device on the network, so that a Linux host Package: nfs-kernel-server Version: 1.2.6-1 Depends: libwrap0, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Section: System/Network Architecture: armel Maintainer: Paul A. Whittaker Size: 62242 Filename: nfs-kernel-server_1.2.6-1_armel.ipk Source: nfs-utils Description: Daemons required to use Linux kernel NFS server capabilities Package: nfs3-server Version: 1.2.9-1 Depends: libwrap0, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.4) Provides: nfs-server Section: System/Network Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: a17b0b6a229beb71885d121068a3a538 Size: 62288 Filename: nfs3-server_1.2.9-1_armel.ipk Source: nfs-utils Description: Daemons required to use Linux kernel NFS server capabilities This build supports only IPV4 and NFS versions 2 and 3. Package: nfs4-client Version: 1.2.9-1 Depends: libtirpc1, libc6 (>= 2.4) Provides: nfs-client Recommends: idmapd Section: System/Network Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: 58b5f2d04aae0d965613c6ac98b7af8d Size: 38190 Filename: nfs4-client_1.2.9-1_armel.ipk Source: nfs-utils Description: NFS version 4 client This build has IPV6 support, although it lacks GSSAPI (Kerberos) support. . Although idmapd is not *strictly* a dependency of this package, you must have this for NFS4 ID mapping to work properly. . If you only require client support for NFS version 2 or 3 over IPV4, you do not need this package - Busybox's "mount" applet includes support for this. Package: nfs4-server Version: 1.2.9-1 Depends: libtirpc1, libwrap0, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.4) Provides: nfs-server Recommends: idmapd Section: System/Network Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: 283683e0c12f1c8f7a106c0ab9c7779e Size: 65522 Filename: nfs4-server_1.2.9-1_armel.ipk Source: nfs-utils Description: Daemons required to use Linux kernel NFS server capabilities This build has IPV6 and NFSv4 (also v2, v3) support, although it lacks GSSAPI (Kerberos) support. . Although idmapd is not *strictly* a dependency of this package, you must have this for NFS4 ID mapping to work properly. . If you have no need of IPV6 or NFS4, use nfs3-server instead - it is smaller. Package: nmbd Version: 1.9.18p10-3 Depends: smb-codepages, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7) Section: System/Network Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: cc7b54c609aab79783cbdf3430da4301 Size: 114654 Filename: nmbd_1.9.18p10-3_armel.ipk Source: samba Description: NetBIOS nameserver This is the nmbd component from Samba 1.x. It is packaged separately from smbd for two reasons: first, because you might only want the NetBIOS-SSN server (smbd) and be willing to forgo the ability to browse shares; second, because - conversely - nmbd is useful in its own right as an easy means of establishing a name-to-IP-address mapping so that (from Windows machines, at least) you can reference your DIET-PC by name rather than IP address. Nmbd can also function as a WINS server, if for some bizarre reason you need one of those. . To avoid version conflicts, nmbd uses a separate configuration file (/etc/samba/nmb.conf) rather than smb.conf. Package: ntpclient Version: 2010_365-1 Depends: checkhostname, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Section: System/Network Architecture: armel Maintainer: Paul A. Whittaker Size: 12310 Filename: ntpclient_2010_365-1_armel.ipk Source: ntpclient Description: Time synchronization daemon A cut-down version of ntpd/ntpdate that implements just the NTP Package: objdump Version: 2.24-1 Depends: libc6 (>= 2.7-1) Section: Utilities Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: 4b3a713e7fe28030f8aded965620cf2b Size: 389660 Filename: objdump_2.24-1_armel.ipk Source: binutils Description: Displays information about object files This utility is useful for identifying shared library and symbol version dependencies in binaries, or more generally just determining what architecture the binary was compiled for. Package: openbox Version: 3.5.0-1 Depends: libpango10-0, libglib20-0, libxcursor1, libxft2, libxml2 (>= 2.6.3), libxinerama1, libxrandr2, libxext6, libx11-6, libc6 (>= 2.4) Provides: x-window-manager Suggests: openbox-i18n, openbox-themes Section: Applications Architecture: armel Maintainer: Paul A. Whittaker Size: 164220 Filename: openbox_3.5.0-1_armel.ipk Source: openbox Description: A simple nice-looking GTK2-based window manager Package: opendchub Version: 0.7.15-1 Depends: initscript, busybox (>= 1.11.2), libc6 (>= 2.7-1) Provides: dc-server Suggests: dc-client Section: System/Network Architecture: armel Maintainer: Paul A. Whittaker Size: 57204 Filename: opendchub_0.7.15-1_armel.ipk Source: opendchub Description: A Direct Connect (P2P) hub DC is not particularly useful as a WAN P2P protocol (BitTorrent has Package: openssh-client Version: 5.1p1-1 Depends: libz1, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Provides: ssh-client Section: Utilities/Network Architecture: armel Maintainer: Paul A. Whittaker Size: 455772 Filename: openssh-client_5.1p1-1_armel.ipk Source: openssh Description: Secure Shell Client Package: openssl Version: 1.0.0o-1 Depends: libssl1-0-0, libc6 (>= 2.7) Section: Utilities Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: 86697fa114686ef89243cd1ea233c7df Size: 196936 Filename: openssl_1.0.0o-1_armel.ipk Source: openssl Description: OpenSSL cryptography utility Package: pand Version: 4.96-1 Depends: libbluetooth3, libc6 (>= 2.7-1) Section: System/Network Architecture: armel Maintainer: Paul A. Whittaker Size: 15164 Filename: pand_4.96-1_armel.ipk Source: bluez Description: Bluetooth Personal Area Network daemon Package: parted Version: 3.2-1 Depends: libuuid1, libdevmapper102, libc6 (>= 2.7) Section: Utilities Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: c272dbed104ea8aa8b0c5112f3f66002 Size: 96104 Filename: parted_3.2-1_armel.ipk Source: parted Description: GNU Partition Editor A full-featured disk partition utility, with support for most partitioning formats, and awareness of common filesystem types (for resizing etc). . There exist smaller alternatives (fdisk, gdisk etc), but parted is the only game in town for scriptable GPT support. Package: partx Version: 2.19.1-1 Depends: libc6 (>= 2.4) Section: Utilities Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: 22a6de26f72777a81c639cb567661d2d Size: 124732 Filename: partx_2.19.1-1_armel.ipk Source: util-linux Description: Disk partition scanner/reporter This utility is useful for making run-time modifications to the in-memory kernel partition table after the on-disk state has been changed by some "unusual" means (i.e. not fdisk or similar). Package: pcimodules Version: 3.3.0-1 Depends: module-init-tools, libz1, libc6 (>= 2.7) Section: System Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: 2a535cb429fae677d6438150a71e5d19 Size: 14072 Filename: pcimodules_3.3.0-1_armel.ipk Source: pciutils Description: A utility that maps PCI IDs to kernel module names This package is deprecated. Initscript 3.5 and later use a new coldplugging method that only requires module-init-tools Busybox applets. . The pcimodules utility uses modules-init-tools information (prepared by depmod) to list kernel modules associated with the PCI vendor and product IDs of devices present on the system. . (Formerly) essential for PCI coldplugging at system boot-up. Package: php5-cgi Version: 5.2.17-1 Depends: libz1, libc6 (>= 2.7-1) Section: System/Network Architecture: armel Maintainer: Paul A. Whittaker Size: 1479776 Filename: php5-cgi_5.2.17-1_armel.ipk Source: php Description: PHP5 [Fast]CGI interpreter This build of PHP 5.2 is intended for use on Thecus NAS appliances, Package: portmap Version: 6.0-2 Depends: libwrap0, libc6 (>= 2.7-1) Provides: rpc-portmapper Section: System/Network Architecture: armel Maintainer: Paul A. Whittaker Size: 8276 Filename: portmap_6.0-2_armel.ipk Source: portmap Description: The Remote Procedure Call portmapper Portmap is needed in order to use RPC-based services (such as NFS). Package: qemu-arm Version: 1.1.0-1 Depends: libaio1, libsdl12-0, libbluetooth3, libjpeg62, libx11-6, libz1, libc6 (>= 2.7-1) Suggests: qemu-img, qemu-keymaps Recommends: qemu-tapctl Section: System Architecture: armel Maintainer: Paul A. Whittaker Size: 1489490 Filename: qemu-arm_1.1.0-1_armel.ipk Source: qemu Description: Emulator for ARM virtual machine targets QEMU's arm-softmmu target. Some features, such as user-mode Package: qemu-i386 Version: 0.12.5-1 Depends: qemu-roms-x86, qemu-roms-vga, libaio1, libsdl12-0, libx11-6, libz1, libc6 (>= 2.7-1) Suggests: qemu-img, qemu-keymaps Recommends: qemu-tapctl Section: System Architecture: armel Maintainer: Paul A. Whittaker Size: 901792 Filename: qemu-i386_0.12.5-1_armel.ipk Source: qemu-kvm Description: KVM-accelerated emulator for 32-bit x86 virtual machine targets This build of QEMU's i386-softmmu target includes Kernel Virtual Package: qemu-img Version: 1.1.0-1 Depends: libaio1, libz1, libc6 (>= 2.7-1) Section: Utilities Architecture: armel Maintainer: Paul A. Whittaker Size: 293288 Filename: qemu-img_1.1.0-1_armel.ipk Source: qemu Description: QEMU virtual disk utility This utility can be used to create virtual disks, convert them to Package: qemu-mips Version: 1.1.0-1 Depends: qemu-roms-vga, libaio1, libbluetooth3, libsdl12-0, libjpeg62, libx11-6, libz1, libc6 (>= 2.7-1) Suggests: qemu-img, qemu-keymaps Recommends: qemu-tapctl Section: System Architecture: armel Maintainer: Paul A. Whittaker Size: 1284860 Filename: qemu-mips_1.1.0-1_armel.ipk Source: qemu Description: Emulator for 32-bit big-endian MIPS virtual machine targets QEMU's mips-softmmu target. Some features, such as user-mode Package: qemu-mipsel Version: 1.1.0-1 Depends: qemu-roms-vga, libaio1, libbluetooth3, libsdl12-0, libjpeg62, libx11-6, libz1, libc6 (>= 2.7-1) Suggests: qemu-img, qemu-keymaps Recommends: qemu-tapctl Section: System Architecture: armel Maintainer: Paul A. Whittaker Size: 1284362 Filename: qemu-mipsel_1.1.0-1_armel.ipk Source: qemu Description: Emulator for 32-bit little-endian MIPS virtual machine targets QEMU's mipsel-softmmu target. Some features, such as user-mode Package: qemu-ppc Version: 1.1.0-1 Depends: qemu-roms-ppc, qemu-roms-vga, libaio1, libsdl12-0, libbluetooth3, libjpeg62, libx11-6, libz1, libc6 (>= 2.7-1) Suggests: qemu-img, qemu-keymaps Recommends: qemu-tapctl Section: System Architecture: armel Maintainer: Paul A. Whittaker Size: 1358210 Filename: qemu-ppc_1.1.0-1_armel.ipk Source: qemu Description: Emulator for 32-bit PowerPC virtual machine targets QEMU's ppc-softmmu target. Some features, such as user-mode Package: qemu-sh4 Version: 1.1.0-1 Depends: libaio1, libbluetooth3, libsdl12-0, libjpeg62, libx11-6, libz1, libc6 (>= 2.7-1) Suggests: qemu-img, qemu-keymaps Recommends: qemu-tapctl Section: System Architecture: armel Maintainer: Paul A. Whittaker Size: 1072894 Filename: qemu-sh4_1.1.0-1_armel.ipk Source: qemu Description: Emulator for 32-bit SuperH-4 virtual machine targets QEMU's sh4-softmmu target. Some features, such as user-mode Package: qemu-sparc Version: 1.1.0-1 Depends: qemu-roms-sparc, libaio1, libsdl12-0, libbluetooth3, libjpeg62, libx11-6, libz1, libc6 (>= 2.7-1) Suggests: qemu-img, qemu-keymaps Recommends: qemu-tapctl Section: System Architecture: armel Maintainer: Paul A. Whittaker Size: 943960 Filename: qemu-sparc_1.1.0-1_armel.ipk Source: qemu Description: Emulator for 32-bit SPARC virtual machine targets QEMU's sparc-softmmu target. Some features, such as user-mode Package: qemu-x86-64 Version: 0.12.5-1 Depends: qemu-roms-x86, qemu-roms-vga, libaio1, libsdl12-0, libx11-6, libz1, libc6 (>= 2.7-1) Suggests: qemu-img, qemu-keymaps Recommends: qemu-tapctl Section: System Architecture: armel Maintainer: Paul A. Whittaker Size: 996768 Filename: qemu-x86-64_0.12.5-1_armel.ipk Source: qemu-kvm Description: KVM-accelerated emulator for 64-bit x86 virtual machine targets This build of QEMU's x86_64-softmmu target includes Kernel Virtual Package: qvwm Version: 1.1.12-10-IKu-1 Depends: libxpm4, libxext6, libx11-6, ed, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Provides: x-window-manager Suggests: x-terminal-emulator Recommends: xdmcp-session | rdp-session | ica-session | rfb-session | mplayer-session | spice-session Section: Applications Architecture: armel Maintainer: Paul A. Whittaker Size: 243492 Filename: qvwm_1.1.12-10-IKu-1_armel.ipk Source: qvwm-IKu Description: A Window 95/98/Me/XP lookalike window manager QVWM is a lightweight window manager that convincingly imitates the Package: rdesktop Version: 1.7.1-1 Depends: libxrandr2, libx11-6, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Provides: rdp-client Suggests: rdesktop-keymaps Recommends: xdpyinfo, storage-detect Section: Applications Architecture: armel Maintainer: Paul A. Whittaker Size: 253884 Filename: rdesktop_1.7.1-1_armel.ipk Source: rdesktop Description: An X11 Remote Desktop Protocol client For connection to a Windows Terminal Server (NT4 TSE, or any Windows Package: redboot-config Version: 0.1-1 Depends: libc6-stdabi Section: Utilities Architecture: armel Maintainer: Paul A. Whittaker Size: 5124 Filename: redboot-config_0.1-1_armel.ipk Source: unknown Description: Utility to get and set Redboot boot monitor variables This is an OEM Thecus binary of unknown origin (if it's GPL, they Package: replimenu Version: 0.9-1 Depends: libc6 (>= 2.7-1) Section: Applications Architecture: armel Maintainer: Paul A. Whittaker Size: 17066 Filename: replimenu_0.9-1_armel.ipk Source: replimenu Description: A simple TTY-based menu system Package: rmt Version: 0.4b44-1 Depends: initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Recommends: rsh-server Section: System/Network Architecture: armel Maintainer: Paul A. Whittaker Size: 6068 Filename: rmt_0.4b44-1_armel.ipk Source: dump Description: Provides local tape drive access to a remote server Since the earliest days of Unix, the dump and restore utilities have Package: rpcbind Version: git20121230-1 Depends: libtirpc1, libwrap0, libc6 (>= 2.7-1) Provides: rpc-portmapper Section: System/Network Architecture: armel Maintainer: Paul A. Whittaker Size: 18214 Filename: rpcbind_git20121230-1_armel.ipk Source: rpcbind Description: The Remote Procedure Call portmapper Rpcbind is the same thing as portmap, but with IPV6 support as well. Package: rrshd Version: 1.3-1 Depends: libwrap0, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Provides: rsh-server Section: System/Network Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: b53e1054ad4d132a92198e87ffec9c3f Size: 8726 Filename: rrshd_1.3-1_armel.ipk Source: rrshd Description: Restricted RSH Daemon An RSH-compatible server that allows execution only of specific programs in a specific user context (avoids using the shell and the ruserok() system call). This is easier and more convenient than using SSH, without sacrificing too much security. . DIET-PC uses this as a means of launching embedded applications from a remote server. . Includes TCP wrapper support (daemon name "rrshd"). Package: rscsi Version: 3.00-1 Depends: initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Recommends: rsh-server Section: System/Network Architecture: armel Maintainer: Paul A. Whittaker Size: 40850 Filename: rscsi_3.00-1_armel.ipk Source: cdrtools Description: A network SCSI control agent for cdrtools A cdrecord process on a remote server can use this agent to issue Package: rsync Version: 3.0.9-2 Depends: initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Recommends: storage-detect Section: Utilities/Network Architecture: armel Maintainer: Paul A. Whittaker Size: 183766 Filename: rsync_3.0.9-2_armel.ipk Source: rsync Description: Network file synchronization service The rsync utility can serve either as an initiator (client), a passive server (target agent invoked via SSH) or as an active standalone server (target daemon, no encryption). . Rsync is typically used to unidirectionally synchronize a local file hierarchy with a remote one, or vice versa. It is capable of efficient differential updates, minimizing network utilization when updating only a few files in a large directory, or small portions of large files. . If used in conjunction with storage-detect, this package will automatically start an rsync daemon in the chroot jail, with nobody:nogroup access privileges. Package: rxvt Version: 2.7.10-1 Depends: libx11-6, initscript, busybox (>= 1.11.2), libc6 (>= 2.7-1) Provides: x-terminal-emulator Section: Applications Architecture: armel Maintainer: Paul A. Whittaker Size: 41092 Filename: rxvt_2.7.10-1_armel.ipk Source: rxvt Description: A lightweight X11 terminal emulator A smaller alternative to xterm, with all the essential features Package: sensord Version: 3.3.5-1 Depends: sensors, libsensors4, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Section: System Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: f69c0dc54327106b3d97a2cd797e546a Size: 24198 Filename: sensord_3.3.5-1_armel.ipk Source: lm_sensors Description: Hardware sensor (temperature, fan speed) monitoring daemon Continuously monitors hardware sensors and logs syslog events when threshold values are exceeded. . Statically linked against the RRDTool 1.0.50 library (which is old, but small). Package: sensors Version: 3.3.5-1 Depends: libsensors4, initscript, busybox (>= 1.17.1-1), libc6 (>= 2.7-1) Section: Utilities Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: 216c88e578173459bf2f3a4bfe11c28e Size: 10422 Filename: sensors_3.3.5-1_armel.ipk Source: lm_sensors Description: Hardware sensor (temperature, fan speed) utility A utility to calibrate hardware sensors and report the current sensor states in detail. . Requires relevant i2c and hardware sensor kernel drivers. Package: sessreg Version: 1.0.7-1 Depends: libc6 (>= 2.7-1) Section: Utilities/X11 Architecture: armel Maintainer: Paul A. Whittaker Size: 4446 Filename: sessreg_1.0.7-1_armel.ipk Source: sessreg Description: Utility for managing utmp/wtmp entries Needed by xdm, and very little else. Most login apps update utmp Package: setleds Version: 1.15.2-1 Depends: initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Section: Utilities Architecture: armel Maintainer: Paul A. Whittaker Size: 4252 Filename: setleds_1.15.2-1_armel.ipk Source: kbd Description: A utility to alter Num Lock, Caps Lock and Scroll lock states Only works in TTY mode - different utilities are needed for an X11 Package: smartctl Version: 5.40-1 Depends: libc6 (>= 2.7-1) Section: Utilities Architecture: armel Maintainer: Paul A. Whittaker Size: 152764 Filename: smartctl_5.40-1_armel.ipk Source: smartmontools Description: S.M.A.R.T. utility Utility for accessing S.M.A.R.T. data and altering the S.M.A.R.T. Package: smbd Version: 1.9.18p10-3 Depends: smb-codepages, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Provides: smb-server Conflicts: cifsd Recommends: nmbd, smbpasswd Section: System/Network Architecture: armel Maintainer: Paul A. Whittaker Size: 187250 Filename: smbd_1.9.18p10-3_armel.ipk Source: samba Description: An antique but small SMB file server This build of a long-since surpassed version of Samba is intended for Package: smbmount Version: 2.2.12-2 Depends: smb-codepages, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Section: System/Network Architecture: armel Maintainer: Paul A. Whittaker Size: 225964 Filename: smbmount_2.2.12-2_armel.ipk Source: samba Description: Utilities needed to mount (obsolete) SMBFS filesystems You only need these utilities if your client or server does not Package: smbpasswd Version: 1.9.18p10-1 Depends: libc6 (>= 2.7-1) Section: Utilities/Network Architecture: armel Maintainer: Paul A. Whittaker Size: 75408 Filename: smbpasswd_1.9.18p10-1_armel.ipk Source: samba Description: Utility to generate Samba 1.x/2.x password hashes You need this utility to modify passwords in /etc/samba/smbpasswd. Package: spicec Version: 0.12.5-1 Depends: libcelt051-0, libpixman-1-0 (>= 0.17.7), libxinerama1, libxfixes3, libxrender1, libxrandr2, libasound2, libjpeg62, libxext6, libx11-6, libz1, libc6 (>= 2.11) Provides: spice-client Section: Applications Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: de25e4fd44d99cf9308a448886c2947c Size: 992088 Filename: spicec_0.12.5-1_armel.ipk Source: spice Description: Spice protocol client Used to access KVM virtual machines using the QXL paravirtual graphics driver. . This build lacks support for SASL and connection data entry via the GUI (X11 display, but command line driven). Package: ssmtp Version: 2.64-2 Depends: libc6 (>= 2.7-1) Provides: sendmail Section: System/Network Architecture: armel Maintainer: Paul A. Whittaker Size: 14404 Filename: ssmtp_2.64-2_armel.ipk Source: ssmtp Description: A simple SMTP relay that pretends to be sendmail The de facto means of delivering email from a program in Linux is to Package: strace Version: 4.8-1 Depends: libc6 (>= 2.7-1) Section: Utilities Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: 9ffd907955e38657bc3b5d5ab0e04d29 Size: 96780 Filename: strace_4.8-1_armel.ipk Source: strace Description: Traces a running process' system call activity Useful for debugging failing programs. Package: strip Version: 2.24-1 Depends: libc6 (>= 2.7-1) Section: Utilities Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: 911c2949de82d27f5ffa06f262fde47b Size: 318214 Filename: strip_2.24-1_armel.ipk Source: binutils Description: Utility to remove symbols from object files Embedded environments need to make sacrifices in order to keep memory consumption to a minimum. Using this utility to remove symbol information from binary files that isn't strictly necessary at run- time is one way of doing this. Package: svn Version: 1.6.17-1 Depends: libsvn-1-0, libc6 (>= 2.7-1) Section: Utilities Architecture: armel Maintainer: Paul A. Whittaker Size: 144018 Filename: svn_1.6.17-1_armel.ipk Source: subversion Description: Version control system Supports "svn" and "file" repositories only. Package: svnadmin Version: 1.6.17-1 Depends: libsvn-1-0, libc6 (>= 2.7-1) Section: Utilities Architecture: armel Maintainer: Paul A. Whittaker Size: 13206 Filename: svnadmin_1.6.17-1_armel.ipk Source: subversion Description: Administration utility for Subversion version control system Supports file-based repositories (fs_fs) only. Package: svnserve Version: 1.6.17-1 Depends: libsvn-1-0, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Section: System/Network Architecture: armel Maintainer: Paul A. Whittaker Size: 25598 Filename: svnserve_1.6.17-1_armel.ipk Source: subversion Description: Network server for Subversion version control repositories Also needed for accessing svn repositories via a SSH tunnel (svn+ssh Package: sysvinit Version: 2.88dsf-4 Depends: initscript, busybox (>= 1.17.1-1), libc6 (>= 2.7-1) Section: System Architecture: armel Maintainer: Paul A. Whittaker Size: 20360 Filename: sysvinit_2.88dsf-4_armel.ipk Source: sysvinit Description: The progenitor and reaper of all userspace activity Provides programs that manage system startup, operation, and Package: tar Version: 1.14-1 Depends: libc6 (>= 2.4) Section: Utilities Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: 74760b4dc08c266a5f3a3b32f4b1cc7b Size: 75746 Filename: tar_1.14-1_armel.ipk Source: tar Description: GNU tar archive utility Provides many features that the Busybox applet does not. Package: textps Version: 1.01-1 Depends: libc6 (>= 2.7-1) Section: System Architecture: armel Maintainer: Paul A. Whittaker Size: 7878 Filename: textps_1.01-1_armel.ipk Source: textps Description: Text to PostScript converter Very primitive but very small. Package: tfs Version: 20070327-1 Depends: libc6 (>= 2.7-1) Section: Utilities Architecture: armel Maintainer: Paul A. Whittaker Size: 8932 Filename: tfs_20070327-1_armel.ipk Source: umon Description: Utility for manipulating Tiny File System (TFS) on Micromonitor-based systems TFS is a simple filesystem for flash memory devices that is used Package: traceroute Version: 2.0.18-1 Depends: libc6 (>= 2.7-1) Section: Utilities Architecture: armel Maintainer: Paul A. Whittaker Size: 24518 Filename: traceroute_2.0.18-1_armel.ipk Source: make Description: IP network diagnostic utility Package: transmission-cli Version: 1.76-1 Depends: libtransmission1 (1.75-1), libc6 (>= 2.7-1) Section: Utilities/Network Architecture: armel Maintainer: Paul A. Whittaker Size: 10924 Filename: transmission-cli_1.76-1_armel.ipk Source: transmission Description: Standalone command line BitTorrent client Not particularly user friendly, but useful for shell script Package: transmission-daemon Version: 1.76-1 Depends: libtransmission1 (1.76-1), ed, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Recommends: transmission-web | transmission-cli Section: System/Network Architecture: armel Maintainer: Paul A. Whittaker Size: 7390 Filename: transmission-daemon_1.76-1_armel.ipk Source: transmission Description: BitTorrent daemon This daemon implements the core functionality of the Transmission Package: transmission-remote Version: 1.76-1 Depends: transmission-daemon (1.76-1), libtransmission1 (1.76-1), libc6 (>= 2.7-1) Section: Utilities/Network Architecture: armel Maintainer: Paul A. Whittaker Size: 44298 Filename: transmission-remote_1.76-1_armel.ipk Source: transmission Description: Control utility for the Transmission (BitTorrent) daemon This utility can be used to control transmission-daemon or Package: tsort Version: 8.22-1 Depends: libc6 (>= 2.4) Section: Utilities Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: 86abf61a1b4f0fc24e3f6a816f441cb7 Size: 14096 Filename: tsort_8.22-1_armel.ipk Source: coreutils Description: Topological sort utility DIET-PC build automation uses this utility to compute the required installation order for an arbitrary collection of packages with complex interdependencies. . It is unlikely that you will find any other use for it. Package: udev Version: 0.136-3 Depends: busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Recommends: hotplug Section: System Architecture: armel Maintainer: Paul A. Whittaker Size: 120278 Filename: udev_0.136-3_armel.ipk Source: udev Description: Userspace device management subsystem This package is deprecated. Initscript 3.5 and later use the Package: unzip Version: 6.0-1 Depends: libc6 (>= 2.7-1) Section: Utilities Architecture: armel Maintainer: Paul A. Whittaker Size: 62180 Filename: unzip_6.0-1_armel.ipk Source: unzip Description: Utility for extracting ZIP archives Includes support for password protected archives, which Busybox unzip Package: usbmodules Version: 0.11-2 Depends: module-init-tools, libc6 (>= 2.7-1) Section: System Architecture: armel Maintainer: Paul A. Whittaker Size: 4640 Filename: usbmodules_0.11-2_armel.ipk Source: usbutils Description: A utililty that maps USB IDs to kernel module names This package is deprecated. Initscript 3.5 and later use a new Package: uuidgen Version: 1.42.4-e2compr-0.4.12-1 Depends: libuuid1, libc6 (>= 2.7-1) Section: Utilities Architecture: armel Maintainer: Paul A. Whittaker Size: 2556 Filename: uuidgen_1.42.4-e2compr-0.4.12-1_armel.ipk Source: e2fsprogs Description: Universally Unique ID generator Utility to generate UUID numbers. Package: vblade Version: 21-1 Depends: initscript, busybox (>= 1.14.3-1), libc6 (>= 2.4) Section: System/Network Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: a7105c9e09febb02cba6474811a26aeb Size: 7852 Filename: vblade_21-1_armel.ipk Source: vblade Description: An ATA over Ethernet (AoE) software target Serves a local file or block device on the network, so that a host can access it as if it were local to that host by means of an AoE initiator driver (for Linux clients, the aoe kernel driver is needed; no additional driver is required to serve AoE). . AoE differs from iSCSI in that it uses Ethernet directly, rather than leveraging existing TCP/IP implementations. This makes it simpler and possibly more efficient than iSCSI, but on the other hand AoE is not a routable protocol, so the target and initiator must reside on the same Ethernet segment. AoE discovery, device isolation, robustness and security are very rudimentary compared with iSCSI (and to a lesser extent FcOE). Package: vncpasswd Version: 1.3.10-1 Depends: libc6 (>= 2.7-1) Section: Utilities/Network Architecture: armel Maintainer: Paul A. Whittaker Size: 6436 Filename: vncpasswd_1.3.10-1_armel.ipk Source: vncpasswd Description: Utility to generate VNC authentication credentials Package: vncviewer Version: 1.3.10-1 Depends: libjpeg62, libxaw6, libxt6, libxmu6, libxext6, libx11-6, libz1, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Provides: rfb-client Section: Applications Architecture: armel Maintainer: Paul A. Whittaker Size: 43846 Filename: vncviewer_1.3.10-1_armel.ipk Source: tightvnc Description: An X11 Remote Frame Buffer (VNC) client Strictly speaking, VNC (Virtual Network Computing) is a product name, Package: vol-id Version: 0.141-2 Depends: libc6 (>= 2.7-1) Section: Utilities Architecture: armel Maintainer: Paul A. Whittaker Size: 23772 Filename: vol-id_0.141-2_armel.ipk Source: udev Description: Generic utility for gathering filesystem information Useful for determining filesystem types and extracting volume labels. Package: wireless-tools Version: 29-1 Depends: libc6 (>= 2.7-1) Section: System/Network Architecture: armel Maintainer: Paul A. Whittaker Size: 33718 Filename: wireless-tools_29-1_armel.ipk Source: wireless_tools Description: Utilities for wireless (802.11) NIC configuration Utilities that use the Linux wireless extensions API (version 21) to Package: wpa-passphrase Version: 0.7.3-1 Depends: libc6 (>= 2.7-1) Section: Utilities/Network Architecture: armel Maintainer: Paul A. Whittaker Size: 13274 Filename: wpa-passphrase_0.7.3-1_armel.ipk Source: wpa_supplicant Description: Utility for obfuscating wpa_supplicant pass phrases Package: wpa-supplicant Version: 0.7.3-1 Depends: libc6 (>= 2.7-1) Section: System/Network Architecture: armel Maintainer: Paul A. Whittaker Size: 171078 Filename: wpa-supplicant_0.7.3-1_armel.ipk Source: wpa_supplicant Description: Daemon to manage WPA security for wireless (802.11) connections Package: x0rfbserver Version: 0.6.1.1-2 Depends: libxpm4, libxext6, libx11-6, libwrap0, libz1, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Section: System/X11 Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: 1fb53420a799b2a715246b73d4db167b Size: 282642 Filename: x0rfbserver_0.6.1.1-2_armel.ipk Source: rfb Description: Provides RFB (VNC) access to a console X11 server Unlike Xvnc, x0rfbserver shadows an existing X11 server rather than implementing its own, and hence behaves more like Windows-based VNC servers do, which is often what people want. . VNC servers used in this way can also be useful as training or troubleshooting aids (allowing a remote user and a local user to share the same X session). . x0rfbserver is an X11 client, and hence is larger and less efficient than X11 server extensions that do the same thing (eg. xf4vnc). However, it will work with any X11 server. . This build of x0rfbserver is statically linked against the xclass widget library (version 0.9.2), and includes TCP wrapper support (daemon name "x0rfbserver"). Package: x11-ssh-askpass Version: 1.2.4.1-1 Depends: libxt6, libx11-6, libc6 (>= 2.7-1) Section: System/X11 Architecture: armel Maintainer: Paul A. Whittaker Size: 13520 Filename: x11-ssh-askpass_1.2.4.1-1_armel.ipk Source: x11-ssh-askpass Description: X11 SSH passphrase dialog OpenSSH has a hook that allows use of an interactive GUI utility Package: xauth Version: 1.0.7-2 Depends: libxau6, libxext6, libx11-6, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Section: Utilities/X11 Architecture: armel Maintainer: Paul A. Whittaker Size: 16222 Filename: xauth_1.0.7-2_armel.ipk Source: xauth Description: Utility for manipulating X11 authentication tokens A bundle that includes xauth itself and a shell script wrapper, with Package: xconsole Version: 1.0.4-1 Depends: libxaw6, libxt6, libxmu6, libx11-6, libc6 (>= 2.7-1) Section: Utilities/X11 Architecture: armel Maintainer: Paul A. Whittaker Size: 6442 Filename: xconsole_1.0.4-1_armel.ipk Source: xconsole Description: Redirects /dev/console to an X11 window Package: xdm Version: 1.1.10-2 Depends: xrdb, x-window-manager, libxinerama1, libxaw6, libxt6, libxmu6, libxdmcp6, libxau6, libx11-6, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Provides: xdmcp-server Recommends: sessreg, xconsole Section: System/X11 Architecture: armel Maintainer: Paul A. Whittaker Size: 63532 Filename: xdm_1.1.10-2_armel.ipk Source: xdm Description: X Display Manager Manages connections using the X11 Display Management Control Protocol Package: xdpyinfo Version: 1.2.0-1 Depends: libxau6, libxext6, libx11-6, libc6 (>= 2.7-1) Section: Utilities/X11 Architecture: armel Maintainer: Paul A. Whittaker Size: 41390 Filename: xdpyinfo_1.2.0-1_armel.ipk Source: xdpyinfo (Xorg) Description: X11 server information reporting utility Provides information about the capabilities of a running X server. Package: xephyr Version: 1.12.4-2 Depends: libpixman-1-0 (>= 0.21.8), xkbcomp, xfonts-minimal, libxdmcp6, libxau6, libxext6, libx11-6, checkhostname, libz1, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Provides: xdmcp-client Section: Applications Architecture: armel Maintainer: Paul A. Whittaker Size: 783756 Filename: xephyr_1.12.4-2_armel.ipk Source: xorg-server Description: An X11 server that is also an X11 client This X11 server is designed to run under an existing X11 server. Package: xfreerdp Version: 0.8.2-1 Depends: libxcursor1, libasound2, libx11-6, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Provides: rdp-client Recommends: storage-detect Section: Applications Architecture: armel Maintainer: Paul A. Whittaker Size: 137678 Filename: xfreerdp_0.8.2-1_armel.ipk Source: freerdp Description: Improved X11 Remote Desktop Protocol client The successor to the Rdesktop project, with various feature Package: xine Version: 0.99.5-2 Depends: libxine1, xset, libpng12-0, libxv1, libxinerama1, libxext6, libx11-6, libz1, libc6 (>= 2.7-1) Provides: media-player Suggests: libasound2 Recommends: libxvmc1, libdvdcss2 Section: Applications Architecture: armel Maintainer: Paul A. Whittaker Size: 579936 Filename: xine_0.99.5-2_armel.ipk Source: xine-ui Description: Xine media player X11 GUI A versatile multiformat audio/video player. Package: xli Version: 1.17.0-1 Depends: libpng12-0, libjpeg62, libxext6, libx11-6, libc6 (>= 2.7) Section: Utilities/X11 Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: 3b09bb987d95ea2798eb919cf7bd1973 Size: 100722 Filename: xli_1.17.0-1_armel.ipk Source: xli Description: X11 image display utility Supports almost any image format other than TIFF. Package: xnest Version: 1.12.4-2 Depends: xset, libpixman-1-0 (>= 0.21.8), xfonts-minimal, libxdmcp6, libxau6, libxext6, libx11-6, checkhostname, libz1, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Provides: xdmcp-client Section: Applications Architecture: armel Maintainer: Paul A. Whittaker Size: 616240 Filename: xnest_1.12.4-2_armel.ipk Source: xorg-server Description: An X11 server that is also an X11 client This X11 server is designed to run under an existing X11 server. Package: xprop Version: 1.2.2-1 Depends: libx11-6, libc6 (>= 2.7) Section: Utilities/X11 Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: 433791f4f7b67b1f82a08390c9729859 Size: 16658 Filename: xprop_1.2.2-1_armel.ipk Source: xprop Description: X11 window property query utility This utility is useful for extracting names and class names from X11 windows, which window managers may perform pattern matching against in order to tailor behaviour and appearance. Package: xrdb Version: 1.0.9-1 Depends: libx11-6, libc6 (>= 2.7-1) Section: Utilities/X11 Architecture: armel Maintainer: Paul A. Whittaker Size: 10762 Filename: xrdb_1.0.9-1_armel.ipk Source: xrdb Description: X11 resource database utility Used in xsession scripts to load custom X11 application resources on Package: xrdp Version: 0.4.2-2 Depends: xvnc, x-window-manager, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Provides: rdp-server Section: System/X11 Architecture: armel Maintainer: Paul A. Whittaker Size: 161266 Filename: xrdp_0.4.2-2_armel.ipk Source: xrdp Description: An X11 Remote Desktop Protocol server Xrdp consists of a VNC-RDP protocol translation layer and a simple Package: xserver-kdrive-fbdev Version: 1.12.4-4 Depends: libpixman-1-0 (>= 0.21.8), xkbcomp, xfonts-minimal, libxdmcp6, libxau6, libz1, busybox (>= 1.11.2), libc6 (>= 2.4) Provides: x-server Section: System/X11 Architecture: armel Maintainer: Paul A. Whittaker MD5Sum: 591a98a37c3599c098070f3be26828bb Size: 729558 Filename: xserver-kdrive-fbdev_1.12.4-4_armel.ipk Source: xorg-server Description: Reduced footprint monolithic X11 server using FBDev driver The Kdrive servers are useful for systems which are severely resource constrained. They are built from the same code as the modular server, but with essential code compiled in and nonessential code omitted entirely. . Xfont and fontenc libraries have been statically linked (to minimize the total footprint). Only PCF bitmap fonts are supported (no truetype support). This build does not support the GL extension. Package: xserver-tinyx-fbdev Version: 4.8.0-1 Depends: xfonts-minimal, libz1, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Provides: x-server Suggests: xkbcomp Section: System/X11 Architecture: armel Maintainer: Paul A. Whittaker Size: 506480 Filename: xserver-tinyx-fbdev_4.8.0-1_armel.ipk Source: xfree86 Description: Reduced footprint monolithic X11 server using FBDev driver The TinyX (formerly Kdrive) servers are useful for systems which are Package: xserver-xorg-accel-ati Version: 6.9.0-3 Depends: xserver-xorg-accel (1.5), ed, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Provides: xorg-accel-driver Section: System/X11 Architecture: armel Maintainer: Paul A. Whittaker Size: 225006 Filename: xserver-xorg-accel-ati_6.9.0-3_armel.ipk Source: xf86-video-ati Description: Accelerated Xorg driver for ATI Radeon chipsets Package: xserver-xorg-accel-nv Version: 2.1.12-3 Depends: xserver-xorg-accel (1.5), ed, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Provides: xorg-accel-driver Section: System/X11 Architecture: armel Maintainer: Paul A. Whittaker Size: 77954 Filename: xserver-xorg-accel-nv_2.1.12-3_armel.ipk Source: xf86-video-nv Description: Accelerated Xorg driver for nVidia chipsets Package: xserver-xorg-accel-openchrome Version: 0.2.903-3 Depends: xserver-xorg-accel (1.5), libdrm2, ed, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Provides: xorg-accel-driver Section: System/X11 Architecture: armel Maintainer: Paul A. Whittaker Size: 138944 Filename: xserver-xorg-accel-openchrome_0.2.903-3_armel.ipk Source: xf86-video-openchrome Description: Accelerated Xorg driver for Via Unichrome chipsets Unlike the "puritanical" xf86-video-via (a.k.a. unichrome) driver, Package: xserver-xorg-accel-radeonhd Version: 1.2.5-3 Depends: xserver-xorg-accel (1.5.1-1), ed, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Provides: xorg-accel-driver Section: System/X11 Architecture: armel Maintainer: Paul A. Whittaker Size: 180530 Filename: xserver-xorg-accel-radeonhd_1.2.5-3_armel.ipk Source: xf86-video-ati Description: Accelerated Xorg driver for AMD GPG (former ATI) Radeon chipsets This driver supports rv5xx and rv6xx chipsets, which may or may not Package: xserver-xorg-accel-siliconmotion Version: 1.6.0-3 Depends: xserver-xorg-accel (1.5), ed, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Provides: xorg-accel-driver Section: System/X11 Architecture: armel Maintainer: Paul A. Whittaker Size: 41070 Filename: xserver-xorg-accel-siliconmotion_1.6.0-3_armel.ipk Source: xf86-video-siliconmotion Description: Accelerated Xorg driver for Silicon Motion chipsets Package: xserver-xorg-accel-smi501 Version: 1.0.0-3 Depends: xserver-xorg-accel (1.5), ed, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Provides: xorg-accel-driver Section: System/X11 Architecture: armel Maintainer: Paul A. Whittaker Size: 25084 Filename: xserver-xorg-accel-smi501_1.0.0-3_armel.ipk Source: xf86-video-smi501 Description: Accelerated Xorg driver for Silicon Motion SM50x chipsets Package: xserver-xorg-accel Version: 1.12.4-2 Depends: xserver-xorg (1.12), libc6 (>= 2.7-1) Section: System/X11 Architecture: armel Maintainer: Paul A. Whittaker Size: 161514 Filename: xserver-xorg-accel_1.12.4-2_armel.ipk Source: xorg-server Description: Common modules for hardware accelerated Xorg drivers This cluster of modules doesn't do anything by itself, it just Package: xserver-xorg-dri-r200 Version: 7.2-2 Depends: xserver-xorg-dri (1.5), libexpat1, libdrm2, libc6 (>= 2.7-1) Section: System/X11 Architecture: armel Maintainer: Paul A. Whittaker Size: 861916 Filename: xserver-xorg-dri-r200_7.2-2_armel.ipk Source: MesaLib Description: Xorg DRI module for ATI Radeon RV2xx chipsets Package: xserver-xorg-dri-r300 Version: 7.2-2 Depends: xserver-xorg-dri (1.5), libexpat1, libdrm2, libc6 (>= 2.7-1) Section: System/X11 Architecture: armel Maintainer: Paul A. Whittaker Size: 865540 Filename: xserver-xorg-dri-r300_7.2-2_armel.ipk Source: MesaLib Description: Xorg DRI module for ATI Radeon RV3xx chipsets Package: xserver-xorg-dri-radeon Version: 7.2-2 Depends: xserver-xorg-dri (1.5), libexpat1, libdrm2, libc6 (>= 2.7-1) Section: System/X11 Architecture: armel Maintainer: Paul A. Whittaker Size: 842650 Filename: xserver-xorg-dri-radeon_7.2-2_armel.ipk Source: MesaLib Description: Xorg DRI module for early ATI Radeon chipsets Package: xserver-xorg-dri-swrast Version: 7.2-2 Depends: xserver-xorg-dri (1.5), libexpat1, libdrm2, libc6 (>= 2.7-1) Section: System/X11 Architecture: armel Maintainer: Paul A. Whittaker Size: 759392 Filename: xserver-xorg-dri-swrast_7.2-2_armel.ipk Source: MesaLib Description: Software GLX (3D) implementation for Xorg 1.5 If you reguire 3D graphics support via the GLX extension, but the Package: xserver-xorg-dri-unichrome Version: 7.2-2 Depends: xserver-xorg-dri (1.5), libexpat1, libdrm2, libc6 (>= 2.7-1) Section: System/X11 Architecture: armel Maintainer: Paul A. Whittaker Size: 822706 Filename: xserver-xorg-dri-unichrome_7.2-2_armel.ipk Source: MesaLib Description: Xorg DRI module for Via Unichrome chipsets Package: xserver-xorg-dri Version: 1.12.4-2 Depends: xserver-xorg (1.12), libdrm2, ed, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Section: System/X11 Architecture: armel Maintainer: Paul A. Whittaker Size: 128566 Filename: xserver-xorg-dri_1.12.4-2_armel.ipk Source: xorg-server Description: Common Xorg modules for DRI-capable drivers These Xorg modules manage DRI support for DRI-capable Xorg drivers. Package: xserver-xorg-vnc Version: 1.5.0-2 Depends: xserver-xorg (1.5.1-1), libjpeg62, ed, libwrap0, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Suggests: vncpasswd Section: System/X11 Architecture: armel Maintainer: Paul A. Whittaker Size: 70422 Filename: xserver-xorg-vnc_1.5.0-2_armel.ipk Source: xf4vnc_module Description: VNC server extension for Xorg 7.4 Augments an Xorg X11 server with RFB (VNC) capability. That is, it Package: xserver-xorg Version: 1.12.4-2 Depends: pciids, libpciaccess0, libpixman-1-0 (>= 0.21.8), xkbcomp, xfonts-minimal, libxdmcp6, libxau6, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Provides: x-server Section: System/X11 Architecture: armel Maintainer: Paul A. Whittaker Size: 1071684 Filename: xserver-xorg_1.12.4-2_armel.ipk Source: xorg-server Description: X.Org X11 server The smallest set of Xorg components that can still produce a useful Package: xset Version: 1.2.1-1 Depends: libxau6, libxext6, libx11-6, libc6 (>= 2.7-1) Section: Utilities/X11 Architecture: armel Maintainer: Paul A. Whittaker Size: 17648 Filename: xset_1.2.1-1_armel.ipk Source: xset (Xorg) Description: X11 server parameter configuration utility This utility can be used to query and set the user configurable Package: xsetroot Version: 1.1.0-1 Depends: libx11-6, libc6 (>= 2.7-1) Section: Utilities/X11 Architecture: armel Maintainer: Paul A. Whittaker Size: 22952 Filename: xsetroot_1.1.0-1_armel.ipk Source: xsetroot (Xorg) Description: Utility to configure the X11 root window Useful for setting a desktop background color and/or tiled X11 Package: xvnc Version: cvs20071208-1 Depends: xfonts-minimal, libjpeg62, libz1, libc6 (>= 2.7-1) Suggests: vncpasswd, xkbcomp Section: System/X11 Architecture: armel Maintainer: Paul A. Whittaker Size: 978934 Filename: xvnc_cvs20071208-1_armel.ipk Source: xf4vnc Description: Virtual X11 server accessible via VNC Xvnc is an X11 server with a virtual (non-physical) output device, Package: xwchoice Version: 1.14-3 Depends: libxaw6, libxt6, libx11-6, libc6 (>= 2.7-1) Section: Utilities/X11 Architecture: armel Maintainer: Paul A. Whittaker Size: 25164 Filename: xwchoice_1.14-3_armel.ipk Source: xwChoice Description: Multipurpose X utility for basic user interaction Provides a lightweight means of prompting the user for simple inputs. Package: zenity Version: 2.20.1-1 Depends: libgtk20-0, libgdk-pixbuf20-0, libpango10-0, libatk10-0, libglib20-0, libxml2, libc6 (>= 2.7-1) Section: Utilities/X11 Architecture: armel Maintainer: Paul A. Whittaker Size: 396080 Filename: zenity_2.20.1-1_armel.ipk Source: zenity Description: Multipurpose X utility for basic user interaction Provides a generic means of prompting the user for simple inputs. . Similar to xwChoice but more reliable and nicer looking, at the cost of a much larger disk footprint (considering its dependencies). Package: zip Version: 3.0-1 Depends: libc6 (>= 2.7-1) Section: Utilities Architecture: armel Maintainer: Paul A. Whittaker Size: 82134 Filename: zip_3.0-1_armel.ipk Source: zip Description: Utility for creating ZIP archives Includes support for password protected archives, which Busybox zip