Package: acpid Version: 1.0.10-1 Depends: initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Section: System Architecture: sh4 Maintainer: Paul A. Whittaker Size: 10558 Filename: acpid_1.0.10-1_sh4.ipk Source: acpid Description: Event handler for ACPI (power-related) events reported by the BIOS Allows the system to shut down gracefully when the power button is Package: alsamixer Version: 1.0.24.2-1 Depends: terminfo, libasound2, libc6 (>= 2.7-1) Section: Utilities Architecture: sh4 Maintainer: Paul A. Whittaker Size: 120404 Filename: alsamixer_1.0.24.2-1_sh4.ipk Source: alsa-utils Description: Curses-based (TTY only) ALSA mixer control utility Used to initially set and to adjust audio volume levels on the Package: amixer Version: 1.0.24.2-1 Depends: libasound2, libc6 (>= 2.7-1) Section: Utilities Architecture: sh4 Maintainer: Paul A. Whittaker Size: 19382 Filename: amixer_1.0.24.2-1_sh4.ipk Source: alsa-utils Description: Command-line-only ALSA mixer control utility Used to initially set and to adjust audio volume levels on the Package: anon-ftpd Version: cvs20050309-2 Depends: libwrap0, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Recommends: storage-detect, zip Section: System/Network Architecture: sh4 Maintainer: Paul A. Whittaker Size: 72156 Filename: anon-ftpd_cvs20050309-2_sh4.ipk Source: wu-ftpd Description: Anonymous FTP server An cut-down anonymous-only FTP service based on WU-FTPD, using a Package: apmd Version: 3.2.2-1 Depends: initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Section: System Architecture: sh4 Maintainer: Paul A. Whittaker Size: 16246 Filename: apmd_3.2.2-1_sh4.ipk Source: apmd Description: Advanced Power Management (APM) utilities APM has been superceded by ACPI on x86 platforms, but you might need Package: aumix Version: 2.9.1-1 Depends: initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Section: Utilities Architecture: sh4 Maintainer: Paul A. Whittaker Size: 6270 Filename: aumix_2.9.1-1_sh4.ipk Source: aumix Description: Command-line-only OSS audio mixer control utility Used to initially set and to adjust audio volume levels on the Package: autofs4-minimal Version: 4.1.4-2 Depends: libc6 (>= 2.7-1) Provides: autofs Section: System Architecture: sh4 Maintainer: Paul A. Whittaker Size: 44862 Filename: autofs4-minimal_4.1.4-2_sh4.ipk Source: autofs Description: Userspace tool to manage dynamic mount point hierarchies Automount daemon with a minimal subset of modules sufficient to Package: busybox Version: 1.19.3-2 Depends: checkhostname, libc6 (>= 2.7-1) Recommends: console-data, storage-detect Section: Utilities Architecture: sh4 Maintainer: Paul A. Whittaker Size: 341666 Filename: busybox_1.19.3-2_sh4.ipk Source: busybox Description: The Swiss Army Knife of Embedded Linux A collection of miniaturized equivalents of GNU utility programs, all Package: cdrtools-minimal Version: 3.00-1 Depends: libc6 (>= 2.7-1) Provides: cdrtools Suggests: isolinux-runtime Section: Utilities Architecture: sh4 Maintainer: Paul A. Whittaker Size: 387868 Filename: cdrtools-minimal_3.00-1_sh4.ipk Source: cdrtools Description: Utilities for the creation of ISO9660 CD/DVDs Mkisofs and cdrecord (or compatible utilities) underpin all Linux Package: checkhostname Version: 1.0-1 Depends: libc6 (>= 2.7-1) Section: System Architecture: sh4 Maintainer: Paul A. Whittaker Size: 3274 Filename: checkhostname_1.0-1_sh4.ipk Source: diet-pc Description: Utility to test plausibility of hostnames and IP addresses This is a multipurpose utility primarily intended as a discover Package: cifsd Version: 2.2.12-4 Depends: smb-codepages, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Provides: smb-server Conflicts: smbd Recommends: nmbd, smbpasswd Section: System/Network Architecture: sh4 Maintainer: Paul A. Whittaker Size: 685986 Filename: cifsd_2.2.12-4_sh4.ipk Source: samba Description: A CIFS/SMB file server This version of Samba, although still obsolete, is considerably more Package: dbclient Version: 2011.54-1 Depends: libz1, libc6 (>= 2.7-1) Provides: ssh-client Section: Utilities/Network Architecture: sh4 Maintainer: Paul A. Whittaker Size: 92424 Filename: dbclient_2011.54-1_sh4.ipk Source: dropbear Description: A minimal Secure Shell (SSH) client The Dropbear project's SSH client implementation. Package: dosfsck Version: 3.0.11-1 Depends: libc6 (>= 2.7-1) Recommends: fsck Section: System Architecture: sh4 Maintainer: Paul A. Whittaker Size: 25332 Filename: dosfsck_3.0.11-1_sh4.ipk Source: dosfstools Description: DOS FAT12/16/32 filesystem consistency checker Includes long filename (VFAT) support. Package: dropbear-utils Version: 2011.54-1 Depends: libz1, libc6 (>= 2.7-1) Section: Utilities/Network Architecture: sh4 Maintainer: Paul A. Whittaker Size: 63374 Filename: dropbear-utils_2011.54-1_sh4.ipk Source: dropbear Description: Utilities for creation and conversion of dropbear key pairs Package: dropbear Version: 2011.54-1 Depends: libz1, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Provides: ssh-server Section: System/Network Architecture: sh4 Maintainer: Paul A. Whittaker Size: 97372 Filename: dropbear_2011.54-1_sh4.ipk Source: dropbear Description: A minimal Secure Shell (SSH) server Provides SSH server functionality only (including scp but not sftp Package: dtach Version: 0.8-1 Depends: libc6 (>= 2.7-1) Section: Utilities Architecture: sh4 Maintainer: Paul A. Whittaker Size: 7674 Filename: dtach_0.8-1_sh4.ipk Source: dtach Description: Multiplexing TTY screen manager Package: e2fsck Version: 1.41.9-e2compr-0.4.12-0-2 Depends: libc6 (>= 2.7-1) Recommends: fsck Section: System Architecture: sh4 Maintainer: Paul A. Whittaker Size: 181242 Filename: e2fsck_1.41.9-e2compr-0.4.12-0-2_sh4.ipk Source: e2fsprogs Description: Ext2/3/4 filesystem consistency checker Includes support for the highly experimental e2compr ext2 compression Package: e2fsprogs-misc Version: 1.41.9-e2compr-0.4.12-0-1 Depends: libc6 (>= 2.7-1) Section: Utilities Architecture: sh4 Maintainer: Paul A. Whittaker Size: 159074 Filename: e2fsprogs-misc_1.41.9-e2compr-0.4.12-0-1_sh4.ipk Source: e2fsprogs Description: Miscellaneous ext2/ext3 filesystem utilities Nonessential tools for manipulating ext2 and ext3 filesystems Package: e3 Version: 2.7.1-1 Depends: libc6 (>= 2.7-1) Section: Utilities Architecture: sh4 Maintainer: Paul A. Whittaker Size: 9262 Filename: e3_2.7.1-1_sh4.ipk Source: e3 Description: Multi-mode TTY text editor A tiny Wordstar-compatible text editor that allows *nix newbies to Package: ed Version: 1.6-1 Depends: libc6 (>= 2.7-1) Section: Utilities Architecture: sh4 Maintainer: Paul A. Whittaker Size: 19130 Filename: ed_1.6-1_sh4.ipk Source: ed Description: Primitive line-based text editor No-one in their right minds would seriously consider using ed interactively anymore. But it is extremely useful for performing complex automated in-place text file changes in shell scripts. . There is an ed applet in Busybox, but it doesn't support enough features to be very useful as yet. Package: enable-x11-numlock Version: 2.1.2-1 Depends: libxext6, libx11-6, libc6 (>= 2.7-1) Section: Utilities/X11 Architecture: sh4 Maintainer: Paul A. Whittaker Size: 5086 Filename: enable-x11-numlock_2.1.2-1_sh4.ipk Source: numlock Description: Utility to set, unset or toggle NumLock in an X11 display X11 servers always initialize displays with NumLock off. This Package: esd Version: 0.2.41-1 Depends: libwrap0, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Conflicts: nasd Section: System/Network Architecture: sh4 Maintainer: Paul A. Whittaker Size: 28804 Filename: esd_0.2.41-1_sh4.ipk Source: EsounD Description: Enlightened Sound Daemon - a network audio server EsounD is one of the more widely supported network audio protocols, Package: ethtool Version: 2.6.36-1 Depends: libc6 (>= 2.7-1) Section: System/Network Architecture: sh4 Maintainer: Paul A. Whittaker Size: 66670 Filename: ethtool_2.6.36-1_sh4.ipk Source: ethtool Description: A utility to configure Linux 2.6 Ethernet drivers Package: evilwm Version: 0.99.17-3 Depends: libxext6, libx11-6, libc6 (>= 2.7-1) Provides: x-window-manager Section: Applications Architecture: sh4 Maintainer: Paul A. Whittaker Size: 15370 Filename: evilwm_0.99.17-3_sh4.ipk Source: evilwm Description: A tiny, unobtrusive X11 window manager A truly minimalistic window manager, whose only decoration is a Package: fc-cache Version: 2.8.0-1 Depends: libfontconfig1, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Section: System Architecture: sh4 Maintainer: Paul A. Whittaker Size: 5874 Filename: fc-cache_2.8.0-1_sh4.ipk Source: fontconfig Description: Fontconfig cache management utility Does for fonts what ldconfig does for shared libraries. Package: floppyd Version: 4.0.17-1 Depends: libxau6, libx11-6, libwrap0, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Section: System/Network Architecture: sh4 Maintainer: Paul A. Whittaker Size: 8726 Filename: floppyd_4.0.17-1_sh4.ipk Source: mtools Description: Block device control agent for mtools Allows mtools programs running on a remote server to access Package: fsck Version: 1.41.9-e2compr-0.4.12-0-1 Depends: libc6 (>= 2.7-1) Recommends: e2fsck, dosfsck Section: System Architecture: sh4 Maintainer: Paul A. Whittaker Size: 29728 Filename: fsck_1.41.9-e2compr-0.4.12-0-1_sh4.ipk Source: e2fsprogs Description: Generic filesystem integrity checker A filesystem agnostic front-end for back-end filesystem specific Package: gdisk Version: 0.8.2-1 Depends: libuuid1, libstdcpp6, libc6 (>= 2.7-1) Section: Utilities Architecture: sh4 Maintainer: Paul A. Whittaker Size: 88862 Filename: gdisk_0.8.2-1_sh4.ipk Source: gptfdisk Description: EFI GUID (GPT) partition table viewer/editor An fdisk lookalike for use with GUID partition tables. Package: gpm Version: 1.20.6-1 Depends: initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Section: System Architecture: sh4 Maintainer: Paul A. Whittaker Size: 43668 Filename: gpm_1.20.6-1_sh4.ipk Source: gpm Description: General Purpose Mouse daemon Permits use of a mouse (e.g. for cut and paste operations) in TTY Package: hiawatha Version: 7.8.2-1 Depends: initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Provides: web-server Recommends: php5-cgi Section: System/Network Architecture: sh4 Maintainer: Paul A. Whittaker Size: 78916 Filename: hiawatha_7.8.2-1_sh4.ipk Source: hiawatha Description: Hiawatha web server Hiawatha is a lightweight web server with an emphasis on security Package: iconv-data-minimal Version: 2.11.3-2 Depends: libc6 (2.11) Provides: iconv-data Section: Libraries Architecture: sh4 Maintainer: Paul A. Whittaker Size: 9848 Filename: iconv-data-minimal_2.11.3-2_sh4.ipk Source: eglibc Description: Minimal set of glibc international character set encodings This package contains the minimum number of iconv (gconv) files Package: ietd Version: 1.4.20.2-1 Depends: initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Section: System/Network Architecture: sh4 Maintainer: Paul A. Whittaker Size: 44266 Filename: ietd_1.4.20.2-1_sh4.ipk Source: iscsitarget Description: iSCSI Enterprise Target Daemon The userspace component of an iSCSI target implementation, which Package: ipkg Version: 0.99.163-4 Depends: libc6 (>= 2.7-1) Section: Utilities Architecture: sh4 Maintainer: Paul A. Whittaker Size: 57598 Filename: ipkg_0.99.163-4_sh4.ipk Source: ipkg Description: A package manager for embedded Linux Required for runtime installation and removal of software components. Package: iptables Version: 1.4.10-2 Depends: initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Section: Utilities Architecture: sh4 Maintainer: Paul A. Whittaker Size: 109374 Filename: iptables_1.4.10-2_sh4.ipk Source: iptables Description: Control utility for kernel iptables (IP filter/NAT) capability This utility is required to load policies into the Linux firewall Package: irqbalance Version: 0.55-1 Depends: initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Section: System Architecture: sh4 Maintainer: Paul A. Whittaker Size: 28452 Filename: irqbalance_0.55-1_sh4.ipk Source: irqbalance Description: IRQ Balance Daemon (for SMP servers) You may need this if you have a SMP host with a heavy I/O interrupt Package: iscsid Version: 2.0-871-1 Depends: initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Section: System/Network Architecture: sh4 Maintainer: Paul A. Whittaker Size: 171254 Filename: iscsid_2.0-871-1_sh4.ipk Source: open-iscsi Description: iSCSI initiator The userspace component of an iSCSI initiator implementation, which Package: jfs-fsck Version: 1.1.15-1 Depends: libuuid1, libc6 (>= 2.7-1) Recommends: fsck Section: System Architecture: sh4 Maintainer: Paul A. Whittaker Size: 124496 Filename: jfs-fsck_1.1.15-1_sh4.ipk Source: jfsutils Description: JFS filesystem consistency checker Package: jfs-mkfs Version: 1.1.15-1 Depends: libuuid1, libc6 (>= 2.7-1) Recommends: mkfs Section: Utilities Architecture: sh4 Maintainer: Paul A. Whittaker Size: 28690 Filename: jfs-mkfs_1.1.15-1_sh4.ipk Source: jfsutils Description: JFS filesystem creation utility Package: jfs-tune Version: 1.1.15-1 Depends: libuuid1, libc6 (>= 2.3.6-1) Section: Utilities Architecture: sh4 Maintainer: Paul A. Whittaker Size: 11880 Filename: jfs-tune_1.1.15-1_sh4.ipk Source: jfsutils Description: JFS filesystem tuning utility Package: kernel-image-qemu-r2d Version: 3.2.12-1 Provides: kernel-image Section: System/Kernel Architecture: sh4 Maintainer: Paul A. Whittaker Size: 2352406 Filename: kernel-image-qemu-r2d_3.2.12-1_sh4.ipk Source: linux Description: A Linux 3.2 kernel for the QEMU SuperH R2D+ emulator Package: kernel-modules-qemu-r2d Version: 3.2.12-1 Depends: busybox (>= 1.17.1-1) Provides: kernel-modules Section: System/Kernel Architecture: sh4 Maintainer: Paul A. Whittaker Size: 1206710 Filename: kernel-modules-qemu-r2d_3.2.12-1_sh4.ipk Source: linux Description: Loadable modules for the 3.2.12 QEMU SuperH R2D+ Linux kernel Package: ldconfig Version: 2.11.3-2 Depends: libc6 (2.11) Section: Utilities Architecture: sh4 Maintainer: Paul A. Whittaker Size: 303912 Filename: ldconfig_2.11.3-2_sh4.ipk Source: eglibc Description: Configuration utility for the runtime dynamic linker This is needed to (re)generate the /etc/ld.so.cache file, which the Package: libasound2 Version: 1.0.24.1-1 Depends: libc6 (>= 2.7-1) Section: Libraries Architecture: sh4 Maintainer: Paul A. Whittaker Size: 360724 Filename: libasound2_1.0.24.1-1_sh4.ipk Source: alsa-lib Description: Userspace API for interfacing with kernel ALSA (audio) drivers Applications need this library in order to make use of Advanced Package: libc6-minimal Version: 2.11.3-2 Provides: libc6 Section: Libraries Architecture: sh4 Maintainer: Paul A. Whittaker Size: 1162146 Filename: libc6-minimal_2.11.3-2_sh4.ipk Source: eglibc Description: A minimal set of GNU C libraries needed to run almost everything Package: libdevmapper102 Version: 2.02.88 Depends: libc6 (>= 2.7-1) Section: Libraries Architecture: sh4 Maintainer: Paul A. Whittaker Size: 64302 Filename: libdevmapper102_2.02.88_sh4.ipk Source: lvm2 Description: Linux Kernel Device Mapper API Package: libdrm-intel1 Version: 2.4.25-1 Depends: libdrm2, libc6 (>= 2.7-1) Section: Libraries Architecture: sh4 Maintainer: Paul A. Whittaker Size: 20916 Filename: libdrm-intel1_2.4.25-1_sh4.ipk Source: libdrm Description: Userspace API for kernel DRM for Intel chipsets Package: libdrm-nouveau1 Version: 2.4.25-1 Depends: libdrm2, libc6 (>= 2.7-1) Section: Libraries Architecture: sh4 Maintainer: Paul A. Whittaker Size: 9754 Filename: libdrm-nouveau1_2.4.25-1_sh4.ipk Source: libdrm Description: Userspace API for kernel DRM for nVidia chipsets Package: libdrm-radeon1 Version: 2.4.25-1 Depends: libdrm2, libc6 (>= 2.7-1) Section: Libraries Architecture: sh4 Maintainer: Paul A. Whittaker Size: 10440 Filename: libdrm-radeon1_2.4.25-1_sh4.ipk Source: libdrm Description: Userspace API for kernel DRM for ATI/AMD (Radeon) chipsets Package: libdrm2 Version: 2.4.25-1 Depends: libc6 (>= 2.7-1) Section: Libraries Architecture: sh4 Maintainer: Paul A. Whittaker Size: 18336 Filename: libdrm2_2.4.25-1_sh4.ipk Source: libdrm Description: Userspace API for kernel Direct Rendering Manager (DRM) drivers Package: libexpat1 Version: 2.0.1-1 Depends: libc6 (>= 2.7-1) Section: Libraries Architecture: sh4 Maintainer: Paul A. Whittaker Size: 62010 Filename: libexpat1_2.0.1-1_sh4.ipk Source: expat Description: XML parser library Package: libfontconfig1 Version: 2.8.0-1 Depends: libfreetype6, libexpat1, libc6 (>= 2.7-1) Recommends: fc-cache Section: Libraries Architecture: sh4 Maintainer: Paul A. Whittaker Size: 101592 Filename: libfontconfig1_2.8.0-1_sh4.ipk Source: fontconfig Description: Generic font configuration library Fontconfig is a back-end API for managing client-side fonts (usually Package: libfreetype6 Version: 2.4.6-1 Depends: libz1, libc6 (>= 2.7-1) Section: Libraries Architecture: sh4 Maintainer: Paul A. Whittaker Size: 260976 Filename: libfreetype6_2.4.6-1_sh4.ipk Source: freetype2 Description: TrueType font engine Anything that uses TrueType fonts will need this library. Package: libglib12-0 Version: 1.2.10-1 Depends: libc6 (>= 2.7-1) Section: Libraries Architecture: sh4 Maintainer: Paul A. Whittaker Size: 72158 Filename: libglib12-0_1.2.10-1_sh4.ipk Source: glib Description: Generic data structure library Historically GLib was intertwined with GTK, and this is still its Package: libgtk12-0 Version: 1.2.10-1 Depends: libxi6, libxext6, libx11-6, libc6 (>= 2.7-1) Section: Libraries/X11 Architecture: sh4 Maintainer: Paul A. Whittaker Size: 737952 Filename: libgtk12-0_1.2.10-1_sh4.ipk Source: gtk Description: GIMP Tool Kit X11 widget set GTK was developed long ago as a user interface toolkit for The GIMP, Package: libice6 Version: 1.0.7-1 Depends: libc6 (>= 2.7-1) Section: Libraries/X11 Architecture: sh4 Maintainer: Paul A. Whittaker Size: 38814 Filename: libice6_1.0.7-1_sh4.ipk Source: libICE Description: X11 Inter-Client Exchange library Package: libjpeg62 Version: 6b-1 Depends: libc6 (>= 2.7-1) Section: Libraries Architecture: sh4 Maintainer: Paul A. Whittaker Size: 63848 Filename: libjpeg62_6b-1_sh4.ipk Source: jpegsrc Description: The ubiqitous JPEG graphics library Provides routines for manipulation and rendering of JPEG images. Package: libpixman-1-0 Version: 0.24.0-1 Depends: libc6 (>= 2.7-1) Section: Libraries/X11 Architecture: sh4 Maintainer: Paul A. Whittaker Size: 164520 Filename: libpixman-1-0_0.24.0-1_sh4.ipk Source: pixman Description: X11/Cairo pixel manipulation library Package: libpng12-0 Version: 1.2.35-1 Depends: libz1, libc6 (>= 2.7-1) Section: Libraries Architecture: sh4 Maintainer: Paul A. Whittaker Size: 72190 Filename: libpng12-0_1.2.35-1_sh4.ipk Source: libpng Description: The Portable Network Graphics library Provides routines for manipulation and rendering of PNG images. Package: libsensors4 Version: 3.3.1-1 Depends: libc6 (>= 2.7-1) Section: Libraries Architecture: sh4 Maintainer: Paul A. Whittaker Size: 39068 Filename: libsensors4_3.3.1-1_sh4.ipk Source: lm_sensors Description: Hardware sensor library /etc/sensors.conf will most likely need to be modified to suit your Package: libsm6 Version: 1.2.0-1 Depends: libice6, libc6 (>= 2.7-1) Section: Libraries/X11 Architecture: sh4 Maintainer: Paul A. Whittaker Size: 13876 Filename: libsm6_1.2.0-1_sh4.ipk Source: libSM Description: The X11 Session Management library Package: libsqlite3-0 Version: 3.7.9-1 Depends: libc6 (>= 2.7-1) Section: Libraries Architecture: sh4 Maintainer: Paul A. Whittaker Size: 344510 Filename: libsqlite3-0_3.7.9-1_sh4.ipk Source: sqlite Description: API for a lightweight serverless SQL database Package: libuuid1 Version: 1.41.9-e2compr-0.4.12-0-1 Depends: libc6 (>= 2.7-1) Section: Libraries Architecture: sh4 Maintainer: Paul A. Whittaker Size: 9088 Filename: libuuid1_1.41.9-e2compr-0.4.12-0-1_sh4.ipk Source: e2fsprogs Description: Universally Unique ID (UUID) library Package: libwrap0 Version: 7.6-ipv6.4-2 Depends: libc6 (>= 2.7-1) Section: Libraries/Network Architecture: sh4 Maintainer: Paul A. Whittaker Size: 13546 Filename: libwrap0_7.6-ipv6.4-2_sh4.ipk Source: tcp_wrappers Description: Provides basic IP filtering and logging for network daemons Package: libx11-6 Version: 1.1.6-1 Depends: libxdmcp6, libxau6, libc6 (>= 2.7-1) Section: Libraries/X11 Architecture: sh4 Maintainer: Paul A. Whittaker MD5Sum: 108efa1c5b7dd63768b4869be627124a Size: 579456 Filename: libx11-6_1.1.6-1_sh4.ipk Source: libX11 Description: Essential infrastructure for all X11 applications You need this package in order to run any kind of X11 application (including an X11 server). However, if you're planning on displaying the application locally, you'll need an X11 server also. . The package consists of Xlib (libX11) and related data files, including bare minimum internationalisation data. Package: libxau6 Version: 1.0.6-1 Depends: libc6 (>= 2.7-1) Section: Libraries/X11 Architecture: sh4 Maintainer: Paul A. Whittaker Size: 4592 Filename: libxau6_1.0.6-1_sh4.ipk Source: libXau Description: X11 Authorization library Package: libxaw6 Version: 1.1-1 Depends: libxmu6, libxt6, libx11-6, libc6 (>= 2.7-1) Section: Libraries/X11 Architecture: sh4 Maintainer: Paul A. Whittaker Size: 143258 Filename: libxaw6_1.1-1_sh4.ipk Source: Xaw95 Description: A non-ugly Athena-compatible widget set The Athena widget set is smaller than any other widget set, but Package: libxaw7-fake Version: 3.0-1 Depends: libxaw6, libc6 (>= 2.7-1) Provides: libxaw7 Section: Libraries/X11 Architecture: sh4 Maintainer: Paul A. Whittaker Size: 2216 Filename: libxaw7-fake_3.0-1_sh4.ipk Source: diet-pc Description: A placebo to satisfy applications with libXaw.so.7 dependencies libXaw.so.7 is exactly the same thing as libXaw.so.6 except that it Package: libxdmcp6 Version: 1.1.0-1 Depends: libc6 (>= 2.7-1) Section: Libraries/X11 Architecture: sh4 Maintainer: Paul A. Whittaker Size: 8122 Filename: libxdmcp6_1.1.0-1_sh4.ipk Source: libXdmcp Description: X11 Display Manager Control Protocol (XDMCP) library Package: libxext6 Version: 1.2.0-1 Depends: libx11-6, libc6 (>= 2.7-1) Section: Libraries/X11 Architecture: sh4 Maintainer: Paul A. Whittaker Size: 23000 Filename: libxext6_1.2.0-1_sh4.ipk Source: libXext Description: X11 Extension library Package: libxfixes3 Version: 4.0.5-1 Depends: libx11-6, libc6 (>= 2.7-1) Section: Libraries/X11 Architecture: sh4 Maintainer: Paul A. Whittaker Size: 6458 Filename: libxfixes3_4.0.5-1_sh4.ipk Source: libXfixes Description: X11 XFIXES extension API Package: libxft2 Version: 2.2.0-1 Depends: libxrender1, libfontconfig1, libc6 (>= 2.7-1) Section: Libraries/X11 Architecture: sh4 Maintainer: Paul A. Whittaker Size: 36670 Filename: libxft2_2.2.0-1_sh4.ipk Source: libXft Description: TrueType font rendering library for X11 applications A high-level API allowing X11 clients to select and draw local Package: libxi6 Version: 1.4.0-1 Depends: libxext6, libx11-6, libc6 (>= 2.7-1) Section: Libraries/X11 Architecture: sh4 Maintainer: Paul A. Whittaker Size: 23182 Filename: libxi6_1.4.0-1_sh4.ipk Source: libXi Description: XInput library API for the XInput X server extension, which deals with oddball Package: libxinerama1 Version: 1.1.1-1 Depends: libxext6, libx11-6, libc6 (>= 2.7-1) Section: Libraries/X11 Architecture: sh4 Maintainer: Paul A. Whittaker Size: 3630 Filename: libxinerama1_1.1.1-1_sh4.ipk Source: libXinerama Description: Xinerama library API for the Xinerama X server extension, which seamlessly expands Package: libxmu6 Version: 1.1.0-1 Depends: libxt6, libxext6, libx11-6, libc6 (>= 2.7-1) Section: Libraries/X11 Architecture: sh4 Maintainer: Paul A. Whittaker Size: 44480 Filename: libxmu6_1.1.0-1_sh4.ipk Source: libXmu Description: X11 Miscellaneous Utility library Package: libxmuu1 Version: 1.1.0-1 Depends: libx11-6, libc6 (>= 2.7-1) Section: Libraries/X11 Architecture: sh4 Maintainer: Paul A. Whittaker Size: 6208 Filename: libxmuu1_1.1.0-1_sh4.ipk Source: libXmu Description: X11 Miscellaneous Utility library (micro) A cut-down version of the Xmu library, without Xt and Xext Package: libxp6 Version: 1.0.1-1 Depends: libxext6, libx11-6, libc6 (>= 2.7-1) Section: Libraries/X11 Architecture: sh4 Maintainer: Paul A. Whittaker Size: 12950 Filename: libxp6_1.0.1-1_sh4.ipk Source: libXp Description: X11 Print Extension library APIs allowing X applications to use an Xprint server for printer Package: libxpm4 Version: 3.5.9-1 Depends: libx11-6, libc6 (>= 2.7-1) Section: Libraries/X11 Architecture: sh4 Maintainer: Paul A. Whittaker Size: 31372 Filename: libxpm4_3.5.9-1_sh4.ipk Source: libXpm Description: X11 pixmap library Routines for the manipulation and rendering of X11 pixmap (XPM) Package: libxrandr2 Version: 1.3.1-1 Depends: libxrender1, libxext6, libx11-6, libc6 (>= 2.7-1) Section: Libraries/X11 Architecture: sh4 Maintainer: Paul A. Whittaker Size: 12454 Filename: libxrandr2_1.3.1-1_sh4.ipk Source: libXrandr Description: X11 RandR extension API Package: libxrender1 Version: 0.9.6-1 Depends: libx11-6, libc6 (>= 2.7-1) Section: Libraries/X11 Architecture: sh4 Maintainer: Paul A. Whittaker Size: 15190 Filename: libxrender1_0.9.6-1_sh4.ipk Source: libXrender Description: X11 render extension API Package: libxt6 Version: 1.0.9-1 Depends: libsm6, libx11-6, libc6 (>= 2.7-1) Section: Libraries/X11 Architecture: sh4 Maintainer: Paul A. Whittaker Size: 155812 Filename: libxt6_1.0.9-1_sh4.ipk Source: libXt Description: The X Toolkit library libXt is frequently used by X11 applications, along with a widget set Package: libxv1 Version: 1.0.6-1 Depends: libxext6, libx11-6, libc6 (>= 2.7-1) Section: Libraries/X11 Architecture: sh4 Maintainer: Paul A. Whittaker Size: 6908 Filename: libxv1_1.0.6-1_sh4.ipk Source: libXv Description: XVideo library API for the XVideo X server extension, which provides access to Package: libxvmc1 Version: 1.0.6-1 Depends: libxext6, libx11-6, libc6 (>= 2.7-1) Section: Libraries/X11 Architecture: sh4 Maintainer: Paul A. Whittaker Size: 11076 Filename: libxvmc1_1.0.6-1_sh4.ipk Source: libXvMC Description: XVideo Motion Compensation libraries APIs for the XVideo-MotionCompensation X server extension, which Package: libz1 Version: 1.2.6-1 Depends: libc6 (>= 2.7-1) Section: Libraries Architecture: sh4 Maintainer: Paul A. Whittaker Size: 43050 Filename: libz1_1.2.6-1_sh4.ipk Source: zlib Description: A compression algorithm library Needed by most programs that use compression. Package: lp-server Version: 1.1.6-1 Depends: libwrap0, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Section: System/Network Architecture: sh4 Maintainer: Paul A. Whittaker Size: 11386 Filename: lp-server_1.1.6-1_sh4.ipk Source: lp_server Description: Provides network access to serial or parallel ports The primary purpose of lp_server (borrowed from LTSP) is to make a Package: lpd Version: 2008.05.17-1 Depends: libwrap0, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Recommends: textps Section: System Architecture: sh4 Maintainer: Paul A. Whittaker Size: 75852 Filename: lpd_2008.05.17-1_sh4.ipk Source: lpr Description: No frills LPD print service Traditional BSD printing utilities, supporting Berkeley LPD only (no Package: lspci Version: 3.1.8-1 Depends: pciids, libz1, libc6 (>= 2.7-1) Section: Utilities Architecture: sh4 Maintainer: Paul A. Whittaker Size: 40238 Filename: lspci_3.1.8-1_sh4.ipk Source: pciutils Description: Lists detected PCI devices in a human-readable fashion Package: lvm2 Version: 2.02.88 Depends: libdevmapper102, libc6 (>= 2.7-1) Section: Utilities Architecture: sh4 Maintainer: Paul A. Whittaker Size: 354042 Filename: lvm2_2.02.88_sh4.ipk Source: lvm2 Description: The Linux Logical Volume Manager Simply put, LVM2 aggregates blocks of storage from one or more block Package: madplay Version: 0.15.2b-1 Depends: libz1, libc6 (>= 2.7-1) Section: Utilities Architecture: sh4 Maintainer: Paul A. Whittaker Size: 112412 Filename: madplay_0.15.2b-1_sh4.ipk Source: madplay Description: Command line integer-only MPEG audio player This MPEG 1/2/3 audio player doesn't use any floating point Package: mcookie Version: 2.12r-1 Depends: libc6 (>= 2.7-1) Section: System/X11 Architecture: sh4 Maintainer: Paul A. Whittaker Size: 5396 Filename: mcookie_2.12r-1_sh4.ipk Source: util-linux Description: Utility to generate MIT-MAGIC-COOKIE-1 X11 authentication tokens Package: mdadm Version: 2.6.9-1 Depends: sendmail, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Section: Utilities Architecture: sh4 Maintainer: Paul A. Whittaker Size: 88354 Filename: mdadm_2.6.9-1_sh4.ipk Source: mdadm Description: Utility for managing RAID devices You need this utility in order to inspect or administer the internal Package: mkcramfs Version: 2.12r-1 Depends: libz1, libc6 (>= 2.7-1) Suggests: mkfs Section: Utilities Architecture: sh4 Maintainer: Paul A. Whittaker Size: 674 Filename: mkcramfs_2.12r-1_sh4.ipk Source: util-linux Description: CRAMFS filesystem creation utility Package: mkdosfs Version: 3.0.11-1 Depends: libc6 (>= 2.7-1) Recommends: mkfs Section: Utilities Architecture: sh4 Maintainer: Paul A. Whittaker Size: 15334 Filename: mkdosfs_3.0.11-1_sh4.ipk Source: dosfstools Description: DOS FAT12/16/32 filesystem creation utility Includes long filename (VFAT) support. Package: mke2fs Version: 1.41.9-e2compr-0.4.12-0-2 Depends: libc6 (>= 2.7-1) Recommends: mkfs Section: Utilities Architecture: sh4 Maintainer: Paul A. Whittaker Size: 105690 Filename: mke2fs_1.41.9-e2compr-0.4.12-0-2_sh4.ipk Source: e2fsprogs Description: Ext2/3/4 filesystem creation utility Includes support for the highly experimental e2compr ext2 compression Package: mkfs Version: 2.12r-1 Depends: libc6 (>= 2.7-1) Recommends: mke2fs, mkdosfs Section: Utilities Architecture: sh4 Maintainer: Paul A. Whittaker Size: 3262 Filename: mkfs_2.12r-1_sh4.ipk Source: util-linux Description: Generic filesystem creation utility A filesystem agnostic front-end for specific back-end filesystem Package: mount Version: 2.12r-3 Depends: busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Section: Utilities Architecture: sh4 Maintainer: Paul A. Whittaker Size: 31550 Filename: mount_2.12r-3_sh4.ipk Source: util-linux Description: Full-featured mount utility The standard mount utility, which is better than the Busybox mount Package: mt-daapd Version: 0.2.4.2-1 Depends: libz1, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Section: System/Network Architecture: sh4 Maintainer: Paul A. Whittaker Size: 178410 Filename: mt-daapd_0.2.4.2-1_sh4.ipk Source: mt-daapd (a.k.a. Firefly Media Server) Description: An iTunes-compatible media server Package: nasd Version: 1.9.3-1 Depends: initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Recommends: aumix Section: System/Network Architecture: sh4 Maintainer: Paul A. Whittaker Size: 51610 Filename: nasd_1.9.3-1_sh4.ipk Source: NAS Description: Network Audio Server Provides remote NAS-aware client applications with access to a local Package: nbd-client Version: 2.9.13-1 Depends: libc6 (>= 2.7-1) Section: System/Network Architecture: sh4 Maintainer: Paul A. Whittaker Size: 6674 Filename: nbd-client_2.9.13-1_sh4.ipk Source: nbd Description: Network Block Device client Presents block devices on remote servers as if they were local. Package: nbd-server Version: 1.4-3 Depends: libwrap0, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Section: System/Network Architecture: sh4 Maintainer: Paul A. Whittaker Size: 8302 Filename: nbd-server_1.4-3_sh4.ipk Source: nbd Description: Network Block Device server Serves a local block device on the network, so that a Linux host Package: nfs-kernel-server Version: 1.2.5-1 Depends: libwrap0, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Section: System/Network Architecture: sh4 Maintainer: Paul A. Whittaker Size: 67338 Filename: nfs-kernel-server_1.2.5-1_sh4.ipk Source: nfs-utils Description: Daemons required to use Linux kernel NFS server capabilities Package: nmbd Version: 1.9.18p10-2 Depends: smb-codepages, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Section: System/Network Architecture: sh4 Maintainer: Paul A. Whittaker Size: 120498 Filename: nmbd_1.9.18p10-2_sh4.ipk Source: samba Description: NetBIOS nameserver This is the nmbd component from Samba 1.x. It is packaged separately Package: opendchub Version: 0.7.15-1 Depends: initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Provides: dc-server Suggests: dc-client Section: System/Network Architecture: sh4 Maintainer: Paul A. Whittaker Size: 57464 Filename: opendchub_0.7.15-1_sh4.ipk Source: opendchub Description: A Direct Connect (P2P) hub DC is not particularly useful as a WAN P2P protocol (BitTorrent has Package: pcimodules Version: 3.1.8-1 Depends: module-init-tools, libz1, libc6 (>= 2.7-1) Section: System Architecture: sh4 Maintainer: Paul A. Whittaker Size: 15046 Filename: pcimodules_3.1.8-1_sh4.ipk Source: pciutils Description: A utility that maps PCI IDs to kernel module names This package is deprecated. Initscript 3.5 and later use a new Package: portmap Version: 6.0-1 Depends: libwrap0, libc6 (>= 2.7-1) Section: System/Network Architecture: sh4 Maintainer: Paul A. Whittaker Size: 8780 Filename: portmap_6.0-1_sh4.ipk Source: portmap Description: The Remote Procedure Call portmapper Portmap is needed in order to use RPC-based services (such as NFS). Package: qvwm Version: 1.1.12-10-IKu-1 Depends: libxpm4, libxext6, libx11-6, ed, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Provides: x-window-manager Suggests: x-terminal-emulator Recommends: xdmcp-session | rdp-session | ica-session | rfb-session | mplayer-session | spice-session Section: Applications Architecture: sh4 Maintainer: Paul A. Whittaker Size: 269302 Filename: qvwm_1.1.12-10-IKu-1_sh4.ipk Source: qvwm-IKu Description: A Window 95/98/Me/XP lookalike window manager QVWM is a lightweight window manager that convincingly imitates the Package: rdesktop Version: 1.7.1-1 Depends: libxrandr2, libx11-6, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Provides: rdp-client Suggests: rdesktop-keymaps Recommends: xdpyinfo, storage-detect Section: Applications Architecture: sh4 Maintainer: Paul A. Whittaker Size: 283264 Filename: rdesktop_1.7.1-1_sh4.ipk Source: rdesktop Description: An X11 Remote Desktop Protocol client For connection to a Windows Terminal Server (NT4 TSE, or any Windows Package: replimenu Version: 0.9-1 Depends: libc6 (>= 2.7-1) Section: Applications Architecture: sh4 Maintainer: Paul A. Whittaker Size: 17474 Filename: replimenu_0.9-1_sh4.ipk Source: replimenu Description: A simple TTY-based menu system Package: rmt Version: 0.4b44-1 Depends: initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Recommends: rsh-server Section: System/Network Architecture: sh4 Maintainer: Paul A. Whittaker Size: 5922 Filename: rmt_0.4b44-1_sh4.ipk Source: dump Description: Provides local tape drive access to a remote server Since the earliest days of Unix, the dump and restore utilities have Package: rrshd Version: 1.1.1-1 Depends: libwrap0, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Provides: rsh-server Section: System/Network Architecture: sh4 Maintainer: Paul A. Whittaker Size: 8790 Filename: rrshd_1.1.1-1_sh4.ipk Source: rrshd Description: Restricted RSH Daemon An RSH-compatible server that allows execution only of specific Package: rscsi Version: 3.00-1 Depends: initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Recommends: rsh-server Section: System/Network Architecture: sh4 Maintainer: Paul A. Whittaker Size: 43474 Filename: rscsi_3.00-1_sh4.ipk Source: cdrtools Description: A network SCSI control agent for cdrtools A cdrecord process on a remote server can use this agent to issue Package: rsync Version: 3.0.9-1 Depends: initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Recommends: storage-detect Section: Utilities/Network Architecture: sh4 Maintainer: Paul A. Whittaker Size: 193602 Filename: rsync_3.0.9-1_sh4.ipk Source: rsync Description: Network file synchronization service The rsync utility can serve either as an initiator (client), a Package: rxvt Version: 2.7.10-1 Depends: libx11-6, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Provides: x-terminal-emulator Section: Applications Architecture: sh4 Maintainer: Paul A. Whittaker Size: 52796 Filename: rxvt_2.7.10-1_sh4.ipk Source: rxvt Description: A lightweight X11 terminal emulator A smaller alternative to xterm, with all the essential features Package: sensord Version: 3.3.1-1 Depends: sensors, libsensors4, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Section: System Architecture: sh4 Maintainer: Paul A. Whittaker Size: 25868 Filename: sensord_3.3.1-1_sh4.ipk Source: lm_sensors Description: Hardware sensor (temperature, fan speed) monitoring daemon Continuously monitors hardware sensors and logs syslog events when Package: sensors Version: 3.3.1-1 Depends: libsensors4, initscript, busybox (>= 1.17.1-1), libc6 (>= 2.7-1) Section: Utilities Architecture: sh4 Maintainer: Paul A. Whittaker Size: 8862 Filename: sensors_3.3.1-1_sh4.ipk Source: lm_sensors Description: Hardware sensor (temperature, fan speed) utility A utility to calibrate hardware sensors and report the current Package: sessreg Version: 1.0.7-1 Depends: libc6 (>= 2.7-1) Section: Utilities/X11 Architecture: sh4 Maintainer: Paul A. Whittaker Size: 4984 Filename: sessreg_1.0.7-1_sh4.ipk Source: sessreg Description: Utility for managing utmp/wtmp entries Needed by xdm, and very little else. Most login apps update utmp Package: setleds Version: 1.15.2-1 Depends: initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Section: Utilities Architecture: sh4 Maintainer: Paul A. Whittaker Size: 4548 Filename: setleds_1.15.2-1_sh4.ipk Source: kbd Description: A utility to alter Num Lock, Caps Lock and Scroll lock states Only works in TTY mode - different utilities are needed for an X11 Package: smartctl Version: 5.40-1 Depends: libc6 (>= 2.7-1) Section: Utilities Architecture: sh4 Maintainer: Paul A. Whittaker Size: 173492 Filename: smartctl_5.40-1_sh4.ipk Source: smartmontools Description: S.M.A.R.T. utility Utility for accessing S.M.A.R.T. data and altering the S.M.A.R.T. Package: smbd Version: 1.9.18p10-3 Depends: smb-codepages, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Provides: smb-server Conflicts: cifsd Recommends: nmbd, smbpasswd Section: System/Network Architecture: sh4 Maintainer: Paul A. Whittaker Size: 194024 Filename: smbd_1.9.18p10-3_sh4.ipk Source: samba Description: An antique but small SMB file server This build of a long-since surpassed version of Samba is intended for Package: smbmount Version: 2.2.12-2 Depends: smb-codepages, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Section: System/Network Architecture: sh4 Maintainer: Paul A. Whittaker Size: 233828 Filename: smbmount_2.2.12-2_sh4.ipk Source: samba Description: Utilities needed to mount (obsolete) SMBFS filesystems You only need these utilities if your client or server does not Package: smbpasswd Version: 1.9.18p10-1 Depends: libc6 (>= 2.7-1) Section: Utilities/Network Architecture: sh4 Maintainer: Paul A. Whittaker Size: 77612 Filename: smbpasswd_1.9.18p10-1_sh4.ipk Source: samba Description: Utility to generate Samba 1.x/2.x password hashes You need this utility to modify passwords in /etc/samba/smbpasswd. Package: ssmtp Version: 2.64-2 Depends: libc6 (>= 2.7-1) Provides: sendmail Section: System/Network Architecture: sh4 Maintainer: Paul A. Whittaker Size: 15532 Filename: ssmtp_2.64-2_sh4.ipk Source: ssmtp Description: A simple SMTP relay that pretends to be sendmail The de facto means of delivering email from a program in Linux is to Package: strace Version: 4.6-1 Depends: libc6 (>= 2.7-1) Section: Utilities Architecture: sh4 Maintainer: Paul A. Whittaker Size: 93724 Filename: strace_4.6-1_sh4.ipk Source: strace Description: Traces a running process' C library call activity Useful for debugging failing programs. Package: sysvinit Version: 2.88dsf-4 Depends: initscript, busybox (>= 1.17.1-1), libc6 (>= 2.7-1) Section: System Architecture: sh4 Maintainer: Paul A. Whittaker Size: 22502 Filename: sysvinit_2.88dsf-4_sh4.ipk Source: sysvinit Description: The progenitor and reaper of all userspace activity Provides programs that manage system startup, operation, and Package: textps Version: 1.01-1 Depends: libc6 (>= 2.7-1) Section: System Architecture: sh4 Maintainer: Paul A. Whittaker Size: 8518 Filename: textps_1.01-1_sh4.ipk Source: textps Description: Text to PostScript converter Very primitive but very small. Package: traceroute Version: 2.0.18-1 Depends: libc6 (>= 2.7-1) Section: Utilities Architecture: sh4 Maintainer: Paul A. Whittaker Size: 24172 Filename: traceroute_2.0.18-1_sh4.ipk Source: make Description: IP network diagnostic utility Package: unzip Version: 6.0-1 Depends: libc6 (>= 2.7-1) Section: Utilities Architecture: sh4 Maintainer: Paul A. Whittaker Size: 61390 Filename: unzip_6.0-1_sh4.ipk Source: unzip Description: Utility for extracting ZIP archives Includes support for password protected archives, which Busybox unzip Package: vblade Version: 20-2 Depends: initscript, busybox (>= 1.14.3-1), libc6 (>= 2.7-1) Section: System/Network Architecture: sh4 Maintainer: Paul A. Whittaker Size: 8416 Filename: vblade_20-2_sh4.ipk Source: vblade Description: An ATA over Ethernet (AoE) software target Serves a local file or block device on the network, so that a host Package: vncpasswd Version: 1.3.10-1 Depends: libc6 (>= 2.7-1) Section: Utilities/Network Architecture: sh4 Maintainer: Paul A. Whittaker Size: 6816 Filename: vncpasswd_1.3.10-1_sh4.ipk Source: vncpasswd Description: Utility to generate VNC authentication credentials Package: vncviewer Version: 1.3.10-1 Depends: libjpeg62, libxaw6, libxt6, libxmu6, libxext6, libx11-6, libz1, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Provides: rfb-client Section: Applications Architecture: sh4 Maintainer: Paul A. Whittaker Size: 46530 Filename: vncviewer_1.3.10-1_sh4.ipk Source: tightvnc Description: An X11 Remote Frame Buffer (VNC) client Strictly speaking, VNC (Virtual Network Computing) is a product name, Package: vol-id Version: 0.141-2 Depends: libc6 (>= 2.7-1) Section: Utilities Architecture: sh4 Maintainer: Paul A. Whittaker Size: 26716 Filename: vol-id_0.141-2_sh4.ipk Source: udev Description: Generic utility for gathering filesystem information Useful for determining filesystem types and extracting volume labels. Package: wireless-tools Version: 29-1 Depends: libc6 (>= 2.7-1) Section: System/Network Architecture: sh4 Maintainer: Paul A. Whittaker Size: 35502 Filename: wireless-tools_29-1_sh4.ipk Source: wireless_tools Description: Utilities for wireless (802.11) NIC configuration Utilities that use the Linux wireless extensions API (version 21) to Package: wpa-passphrase Version: 0.7.3-1 Depends: libc6 (>= 2.7-1) Section: Utilities/Network Architecture: sh4 Maintainer: Paul A. Whittaker Size: 13904 Filename: wpa-passphrase_0.7.3-1_sh4.ipk Source: wpa_supplicant Description: Utility for obfuscating wpa_supplicant pass phrases Package: wpa-supplicant Version: 0.7.3-1 Depends: libc6 (>= 2.7-1) Section: System/Network Architecture: sh4 Maintainer: Paul A. Whittaker Size: 183330 Filename: wpa-supplicant_0.7.3-1_sh4.ipk Source: wpa_supplicant Description: Daemon to manage WPA security for wireless (802.11) connections Package: x0rfbserver Version: 0.6.1.1-2 Depends: libxpm4, libxext6, libx11-6, libwrap0, libz1, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Section: System/X11 Architecture: sh4 Maintainer: Paul A. Whittaker Size: 345244 Filename: x0rfbserver_0.6.1.1-2_sh4.ipk Source: rfb Description: Provides RFB (VNC) access to a console X11 server Unlike Xvnc, x0rfbserver shadows an existing X11 server rather than Package: x11-ssh-askpass Version: 1.2.4.1-1 Depends: libxt6, libx11-6, libc6 (>= 2.7-1) Section: System/X11 Architecture: sh4 Maintainer: Paul A. Whittaker Size: 14982 Filename: x11-ssh-askpass_1.2.4.1-1_sh4.ipk Source: x11-ssh-askpass Description: X11 SSH passphrase dialog OpenSSH has a hook that allows use of an interactive GUI utility Package: xauth Version: 1.0.6-1 Depends: libxau6, libxext6, libx11-6, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Section: Utilities/X11 Architecture: sh4 Maintainer: Paul A. Whittaker Size: 16150 Filename: xauth_1.0.6-1_sh4.ipk Source: xauth Description: Utility for manipulating X11 authentication tokens A bundle that includes xauth itself and a shell script wrapper, with Package: xconsole Version: 1.0.4-1 Depends: libxaw6, libxt6, libxmu6, libx11-6, libc6 (>= 2.7-1) Section: Utilities/X11 Architecture: sh4 Maintainer: Paul A. Whittaker Size: 6836 Filename: xconsole_1.0.4-1_sh4.ipk Source: xconsole Description: Redirects /dev/console to an X11 window Package: xdm Version: 1.1.10-1 Depends: xrdb, x-window-manager, libxinerama1, libxaw6, libxt6, libxmu6, libxdmcp6, libxau6, libx11-6, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Provides: xdmcp-server Recommends: sessreg, xconsole Section: System/X11 Architecture: sh4 Maintainer: Paul A. Whittaker Size: 65682 Filename: xdm_1.1.10-1_sh4.ipk Source: xdm Description: X Display Manager Manages connections using the X11 Display Management Control Protocol Package: xdpyinfo Version: 1.2.0-1 Depends: libxext6, libx11-6, libc6 (>= 2.7-1) Section: Utilities/X11 Architecture: sh4 Maintainer: Paul A. Whittaker Size: 43706 Filename: xdpyinfo_1.2.0-1_sh4.ipk Source: xdpyinfo Description: X11 server information reporting utility Provides information about the capabilities of a running X server. Package: xephyr Version: 1.10.4-1 Depends: pciids, libpixman-1-0 (>= 0.21.4), xkbcomp, xfonts-minimal, libxdmcp6, libxau6, libxext6, libx11-6, checkhostname, libz1, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Provides: xdmcp-client Section: Applications Architecture: sh4 Maintainer: Paul A. Whittaker Size: 845480 Filename: xephyr_1.10.4-1_sh4.ipk Source: xorg-server Description: An X11 server that is also an X11 client This X11 server is designed to run under an existing X11 server. Package: xev Version: 1.1.0-1 Depends: libx11-6, libc6 (>= 2.7-1) Section: Utilities/X11 Architecture: sh4 Maintainer: Paul A. Whittaker Size: 8974 Filename: xev_1.1.0-1_sh4.ipk Source: xev Description: X11 event monitor This utility is useful for low-level debugging of X11 applications, Package: xnest Version: 1.10.4-1 Depends: xset, libpixman-1-0, xfonts-minimal, libxdmcp6, libxau6, libxext6, libx11-6, checkhostname, libz1, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Provides: xdmcp-client Section: Applications Architecture: sh4 Maintainer: Paul A. Whittaker Size: 721106 Filename: xnest_1.10.4-1_sh4.ipk Source: xorg-server Description: An X11 server that is also an X11 client This X11 server is designed to run under an existing X11 server. Package: xprop Version: 1.2.0-1 Depends: libx11-6, libc6 (>= 2.7-1) Section: Utilities/X11 Architecture: sh4 Maintainer: Paul A. Whittaker Size: 15434 Filename: xprop_1.2.0-1_sh4.ipk Source: xprop Description: X11 window property query utility This utility is useful for extracting names and class names from X11 Package: xrdb Version: 1.0.9-1 Depends: libx11-6, libc6 (>= 2.7-1) Section: Utilities/X11 Architecture: sh4 Maintainer: Paul A. Whittaker Size: 11814 Filename: xrdb_1.0.9-1_sh4.ipk Source: xrdb Description: X11 resource database utility Used in xsession scripts to load custom X11 application resources on Package: xrdp Version: 0.4.2-1 Depends: xvnc, x-window-manager, libx11-6, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Provides: rdp-server Section: System/X11 Architecture: sh4 Maintainer: Paul A. Whittaker Size: 224634 Filename: xrdp_0.4.2-1_sh4.ipk Source: xrdp Description: An X11 Remote Desktop Protocol server Xrdp consists of a VNC-RDP protocol translation layer and a simple RDP session manager; most of the real work is done by Xvnc. . Xrdp can also function as an RDP and VNC client, make use of the (highly experimental) X11rdp server instead of Xvnc, and hook into PAM, but that functionality has been omitted from this cut-down package. . Xrdp is useful in situations where you want reconnectable access to a secondary DIET-PC desktop, leaving the console free for other purposes, and where it is not possible/convenient to install VNC client software on the machine(s) from which you will be connecting. Package: xserver-kdrive-fbdev Version: 1.10.4-1 Depends: pciids, libpixman-1-0 (>= 0.21.4), xkbcomp, xfonts-minimal, libxdmcp6, libxau6, libz1, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Provides: x-server Section: System/X11 Architecture: sh4 Maintainer: Paul A. Whittaker Size: 779266 Filename: xserver-kdrive-fbdev_1.10.4-1_sh4.ipk Source: xorg-server Description: Reduced footprint monolithic X11 server using FBDev driver The Kdrive servers are useful for systems which are severely resource Package: xserver-xorg-accel Version: 1.10.4-1 Depends: xserver-xorg (1.10), libc6 (>= 2.7-1) Section: System/X11 Architecture: sh4 Maintainer: Paul A. Whittaker Size: 188172 Filename: xserver-xorg-accel_1.10.4-1_sh4.ipk Source: xorg-server Description: Common modules for hardware accelerated Xorg drivers This cluster of modules doesn't do anything by itself, it just Package: xserver-xorg-dri Version: 1.10.4-1 Depends: xserver-xorg (1.10), libdrm2, ed, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Section: System/X11 Architecture: sh4 Maintainer: Paul A. Whittaker Size: 128894 Filename: xserver-xorg-dri_1.10.4-1_sh4.ipk Source: xorg-server Description: Common Xorg modules for DRI-capable drivers These Xorg modules manage DRI support for DRI-capable Xorg drivers. Package: xserver-xorg Version: 1.10.4-1 Depends: pciids, libpixman-1-0 (>= 0.21.4), xkbcomp, xfonts-minimal, libxdmcp6, libxau6, initscript, busybox (>= 1.11.2-1), libc6 (>= 2.7-1) Provides: x-server Section: System/X11 Architecture: sh4 Maintainer: Paul A. Whittaker Size: 1145234 Filename: xserver-xorg_1.10.4-1_sh4.ipk Source: xorg-server Description: X.Org X11 server The smallest set of Xorg components that can still produce a useful Package: xset Version: 1.2.1-1 Depends: libxext6, libx11-6, libc6 (>= 2.7-1) Section: Utilities/X11 Architecture: sh4 Maintainer: Paul A. Whittaker Size: 15060 Filename: xset_1.2.1-1_sh4.ipk Source: xset (Xorg) Description: X11 server parameter configuration utility This utility can be used to query and set the user configurable Package: xsetroot Version: 1.1.0-1 Depends: libx11-6, libc6 (>= 2.7-1) Section: Utilities/X11 Architecture: sh4 Maintainer: Paul A. Whittaker Size: 24640 Filename: xsetroot_1.1.0-1_sh4.ipk Source: xsetroot Description: Utility to configure the X11 root window Useful for setting a desktop background color and/or tiled X11 Package: xvnc Version: cvs20071208-1 Depends: xfonts-minimal, libjpeg62, libz1, libc6 (>= 2.7-1) Suggests: vncpasswd, xkbcomp Section: System/X11 Architecture: sh4 Maintainer: Paul A. Whittaker Size: 763824 Filename: xvnc_cvs20071208-1_sh4.ipk Source: xf4vnc Description: Virtual X11 server accessible via VNC Xvnc is an X11 server with a virtual (non-physical) output device, Package: xwchoice Version: 1.14-3 Depends: libxaw6, libxt6, libx11-6, libc6 (>= 2.7-1) Section: Utilities/X11 Architecture: sh4 Maintainer: Paul A. Whittaker Size: 25588 Filename: xwchoice_1.14-3_sh4.ipk Source: xwChoice Description: Multipurpose X utility for basic user interaction Provides a lightweight means of prompting the user for simple inputs.